Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

next projector issue cinemax chassis

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> CRT Projectors
View previous topic :: View next topic  
Author Message
jaredjaric




Joined: 05 Jun 2007
Posts: 228
Location: Philippines


PostLink    Posted: Sat Sep 19, 2020 5:58 pm    Post subject: next projector issue cinemax chassis Reply with quote


        Register to remove this ad. It's free!
with a lot of help from you guys and Curt, i was able to fix my 909 issues.

Thanks .


Here is another issue i have ,
this PJ was working fine and kept in storage for two years ,
it is a cinemax with unbalanced G2 voltage, i believe.

I suspected it as bad G2 Diag board,
But swapping G2 boards did not help,
swapping neckboards did isolate the situation.

It was at first on the red tube, after swapping the neck board of the red with the green neckboard,
the overbright raster moved to the green.
Is this a case of readjusting G2 like the older barcos?

Measuring on the test point M1, on the neck board, with a 6500K white screen, the red went blank and measured 0.88 volts;
Green measured 1.1 volts Dc( quite bright) , blue bright also at .85 dc.

There is a trim pot P1 on the neckboard , should i re adjust it?

Or it is very dangerous, without knowing the right procedure.
Back to top
jaredjaric




Joined: 05 Jun 2007
Posts: 228
Location: Philippines


PostLink    Posted: Sat Sep 19, 2020 6:01 pm    Post subject: g2 and raster pics Reply with quote

Here are some pics of the raster
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> CRT Projectors All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum