CurtPalme.com Home Theater Forum

[DGP]

Hello,

I'm Diego from Barcelona Spain. I participated in the forum several years till I moved to a digital projection system some years ago.
I still keep my VDC 9500 Ultra and many spares, but due to space reasons I have to let them go.


The projector was manufactured in 2004 and I keep it in mint condition. It also includes green and red C elements, HFQ-900 lenses, all boards with new high end caps, 6 pole magnets, Moome 1.3 HDMI board, frankenyokes (Sony 1292 focus coils on Marquee tubes) and other improvements mods discussed in this forum.
It has 2670 hours on the tubes, but I used it together with a Da-Lite High Power screen (2.8 Gain) --> So I did not push G2 and do not need to push contrast too. The tubes do not show any wear or mask on them.

I would prefer to sell the projector and the spares as a kit, but I'm also open to sale the spare parts separately.

- Projector + spares $1500 + shipment cost
- Projector only $1200 + shipment cost
- Spare parts Kit $500 + shipment cost

Marquee spare parts included in the kit:

2x CLB 50-2036-03p issue 1
1x Color correction 50-2017-01p
3x VNBs
1x Acon Control board
2x FCM 50-2034-02p
1x HDM 50-2003-07p issue 1
1x Convergence 50-2230-01p
1x Vertical 50-2330-02p
2x VIM 50-2035-02p
3x 4 poles magnets
3x deflection coils
4x convergence coils
1x HV splitter
1x LVPS 10-000229-03p issue 2
1x HVPS 10-000310-02p issue 3
1x complete rear heatsink including vertical, convergence and stigmator boards


I also have a set of HD10F ($150 + shipment cost) and a set of HD145 ($100 + shipment cost) lenses for sale.

I'm open to discuss reasonable offers.

Regards,
Diego