barco_75
Joined: 14 Jan 2009 Posts: 169 Location: Chicago
|
Link Posted: Sat May 25, 2019 10:06 pm Post subject: Barco-Cine-8-Onyx-Zeinth-Pro-1200x-C-Elements-C-Element thu |
|
|
Pulled from Faroudja rear projection TV with Barco D708 Retroblock installed in rear projection I've been told these are the same C-Elements installed in Barco Cine 8 Onyx and Zenith 1200x. Can be used with HD214/215 lens (I have the lens). To install on 808S you would need liquid cooled tubes and possibly custom made adapter to install c-elments and my native plates.
Red has a small defect from factory and can best be seen in the last photo. I never noticed a defect. The green has the biggest issue because I scuffed it during removal. I've been told it might be able to be buffed out but I don't know if this is possible. Other than above, C-elements are clean and will be packed to prevent further damage during shipping.
Includes HD-214 lens. One scratch on front element. Shouldn't have any effect on image.
$100 obo for everything.
Description: |
|
Filesize: |
216.19 KB |
Viewed: |
2050 Time(s) |
|
|
|