View previous topic :: View next topic |
Author |
Message |
ElTopo
Joined: 07 Nov 2006 Posts: 1608
|
Link Posted: Tue Aug 21, 2018 9:52 pm Post subject: |
|
|
The manual says for input:
- up to 130kHz
- up to 130Hz
- up to 1600 x 1200@60Hz
So 1080p@24 should work ?
A lot of output resolutions (mit all) can run with 72Hz
ElTopo
_________________ Barco Cine 9 the one and only
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Wed Aug 22, 2018 2:08 am Post subject: |
|
|
Say JB
I have no ringing or need to adjust porches and I am not an ISF geek constantly looking for flaws, there aren't any! LOL
Curt and another personality here visited about six years ago; it was Curt's first look at my rig. Curt is picking his jaw up off the floor and the other chap gives me a funny look and says......"the pixels aren't square!" So be it.
I am fine with 60hz everything as there are no judder issues.
|
|
Back to top |
|
|
ElTopo
Joined: 07 Nov 2006 Posts: 1608
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Wed Aug 22, 2018 2:33 pm Post subject: |
|
|
Guys
It's a matter of trying things and then pick the one you like. Remember when 48hz was the craze? "It's so Sharp!"
|
|
Back to top |
|
|
ElTopo
Joined: 07 Nov 2006 Posts: 1608
|
Link Posted: Thu Aug 23, 2018 3:02 pm Post subject: |
|
|
Well 1280 x 1024 is sharp as a digital.
Still testing....
_________________ Barco Cine 9 the one and only
|
|
Back to top |
|
|
pj-toso
Joined: 19 Mar 2015 Posts: 69 Location: Norway - Oppland
|
Link Posted: Thu Aug 23, 2018 5:22 pm Post subject: |
|
|
ElTopo wrote: | Well 1280 x 1024 is sharp as a digital.
Still testing.... |
How much of the phosphor do you use? If u can use most of the phosphor, this should be crazy good for a crt. If u use most of the phosphor u should approach 50% MTF.
_________________ Disclaimer: My postings are subjective and not facts.
|
|
Back to top |
|
|
ElTopo
Joined: 07 Nov 2006 Posts: 1608
|
Link Posted: Thu Aug 23, 2018 7:12 pm Post subject: |
|
|
With a 4:3 rez like 1280 x 1024 you use like 85-90%
_________________ Barco Cine 9 the one and only
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Thu Aug 23, 2018 10:55 pm Post subject: |
|
|
What is your screen size/aspect ratio and overlap?
I am using 16:9 with 20% overlap.
Send me your e.mail and I'll send you my setup guide. And my DVX settings.
ehometech8022@yahoo.com
|
|
Back to top |
|
|
ElTopo
Joined: 07 Nov 2006 Posts: 1608
|
Link Posted: Fri Aug 24, 2018 5:26 am Post subject: |
|
|
Hey Tim,
my screen at present has 3,32m in width (scope 2.40)
I need to check some stuff as this would require some kind of rebuild of my HT.
I'll mail you.
thanks
ElTopo
_________________ Barco Cine 9 the one and only
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Fri Aug 24, 2018 1:59 pm Post subject: |
|
|
You may want to go with a ten percent overlap.
|
|
Back to top |
|
|
km987654
Joined: 25 Jul 2007 Posts: 2857 Location: Australia
TV/Projector: Barco BG809s
|
Link Posted: Thu Sep 06, 2018 8:58 pm Post subject: |
|
|
Any progress.
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Fri Sep 07, 2018 1:05 am Post subject: |
|
|
DELETED
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 06 Mar 2006 Posts: 17860 Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
|
Back to top |
|
|
|
|