View previous topic :: View next topic |
Author |
Message |
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sun Aug 19, 2018 8:48 pm Post subject: |
|
|
Yep, but I've only ever had one MB with a hole blown into it, an old 800 chassis.
OK, everything has been purged out of the basement, 2000 lbs or so, and I walked 2 miles from the basement to around the front, that's how many trips it took. Tried uploading pix, but I get error messages, saying it's an empty file.
Other stuff that I purged:
-Ampro LVPS and HVPS, the last of the late model stuff I had.
-a box of remotes, one 2000 remote apparently works last time I tested them.
-A bunch of MArquee remotes, mostly parts units.
-all NEC XG Stuff, Guaranteed all the system boards are toast though, all other boards should be OK.
-A bunch of G90 boards, but not ones that I've ever had fail before. So they are probably worthless to anyone.
Not done yet:
tubes and lenses.
I have a TON of 8" BArco and Marquee tubes, all will go. I have one new green Marquee tube in the box that I got from Tim about 5 years ago, that I'd sell for $100. Much less for R and B tubes for the Barco 8" and MArquee 8". All 8" lenses will go, including a few pairs of HD145 and/or 144 lenses.
Got a few XG red tubes as well.
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sun Aug 19, 2018 8:49 pm Post subject: |
|
|
Oh, and I have a TON of Barco 909 HDM boards that work perfectly. Definitely known to fail, so a good idea to keep one handy, $100 USD.
|
|
Back to top |
|
|
Pokemon640
Joined: 28 Jul 2015 Posts: 49 Location: Greece
|
Link Posted: Sun Aug 19, 2018 10:01 pm Post subject: |
|
|
garyfritz wrote: | Curt Palme wrote: | Can't get the main motherboard, sorry, those are riveted into the chassis, |
That's crazy, especially for that time period. They designed them to be non-serviceable!? | i have take a look in service manual about 1209s, it's this one
You can take apart, but it's huge, plus shipping cost.
repair is easy, it's just connectors, cables and capacitors.
I'm looking for all cards for it, i have a friend with 1209s and maybe one card connector is junk, thats why i was asking for mainboard . to combine shipping costs.
but still, i need cards to find my weird yellowish picture in RGBHV signal.
Curt Palme wrote: | Oh, and I have a TON of Barco 909 HDMI boards that work perfectly. Definitely known to fail, so a good idea to keep one handy, $100 USD. | Is that port 3 card from moome or greg mod ?
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sun Aug 19, 2018 10:32 pm Post subject: |
|
|
Neither, it's a stock port 3 board. I've never kept a 1209s motherboard, sorry, but have everything else that fits into it. Shipping for every board will be expensive though, figure on $150-200 USD.
|
|
Back to top |
|
|
Pokemon640
Joined: 28 Jul 2015 Posts: 49 Location: Greece
|
Link Posted: Sun Aug 19, 2018 11:30 pm Post subject: |
|
|
Curt Palme wrote: | Neither, it's a stock port 3 board. I've never kept a 1209s motherboard, sorry, but have everything else that fits into it. Shipping for every board will be expensive though, figure on $150-200 USD. | np
ok, that's what i need it, all 7 cards set for my 1209, not the HDM/HDMI or sth else 150-200$ it's ok (combined)
use USPS mail, not TNT/UPS.
Did you find any RGB input controller or quad decoder ?
|
|
Back to top |
|
|
tfuller
Joined: 17 Nov 2017 Posts: 22
|
Link Posted: Mon Aug 20, 2018 12:52 am Post subject: |
|
|
Definitely let me know if you have any tubes appropriate for a G90 that you're inclined to get rid of. I won't need a ton of convincing to buy anything better than what's in mine right now, especially the what-was-once-green tube
I do, email me through the site please.
Thanks!
Curt
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Mon Aug 20, 2018 1:48 pm Post subject: |
|
|
Pokemon640 wrote: | Curt Palme wrote: | Neither, it's a stock port 3 board. I've never kept a 1209s motherboard, sorry, but have everything else that fits into it. Shipping for every board will be expensive though, figure on $150-200 USD. | np
ok, that's what i need it, all 7 cards set for my 1209, not the HDM/HDMI or sth else 150-200$ it's ok (combined)
use USPS mail, not TNT/UPS.
Did you find any RGB input controller or quad decoder ? |
OK, email me through the site please.
No input or quad decoders, sorry, those got thrown out about a year ago.
|
|
Back to top |
|
|
UncleWill
Joined: 11 Dec 2012 Posts: 413 Location: WashDC area, ViennaVA
|
Link Posted: Tue Aug 21, 2018 4:00 am Post subject: |
|
|
Any Marquee remotes or are those long gone? Just double checking
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Tue Aug 21, 2018 1:56 pm Post subject: |
|
|
I think they are still here. Shoot me an email pls.
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sat Aug 25, 2018 11:13 pm Post subject: |
|
|
Funny how a bunch of people post wanting stuff, then never email me.
I have now boxed up everyone that did follow up with an email, save for someone that emailed me regarding BArco 70X parts and boards. I put them aside, but either misplaced the email, or the person didn't reply. You have 24 hours to respond, Monday those pulled boards go to the recycler as well. Ditto for someone wanting G70 parts. They have been pulled, but I can't find the corresponding email or PM.
Tomorrow I go through my tubes. Everything other than 9" tubes is being trashed, and every 9" tube showing more than even the slightest hint of wear is also being destroyed. Speak up now, or it's all gone forever!
|
|
Back to top |
|
|
Pokemon640
Joined: 28 Jul 2015 Posts: 49 Location: Greece
|
Link Posted: Sun Aug 26, 2018 9:21 pm Post subject: |
|
|
did you find 8" c-elements ? (R+G)
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sun Aug 26, 2018 9:22 pm Post subject: |
|
|
No, my helper hasn't shown up, so I am postponing this until next weekend most likely.
|
|
Back to top |
|
|
virusc
Joined: 11 Apr 2007 Posts: 322 Location: Massachusetts
|
Link Posted: Mon Aug 27, 2018 3:15 pm Post subject: |
|
|
Curt I sent you a email about the 70x parts. Waiting for how to pay and cost from you.
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Mon Aug 27, 2018 5:36 pm Post subject: |
|
|
virusc wrote: | Curt I sent you a email about the 70x parts. Waiting for how to pay and cost from you. |
That was the stuff going to Hopedale? Just got it boxed up, will get a shipping price later this afternoon.
Cheers!
|
|
Back to top |
|
|
virusc
Joined: 11 Apr 2007 Posts: 322 Location: Massachusetts
|
Link Posted: Wed Aug 29, 2018 1:35 pm Post subject: |
|
|
Curt, Yes - Hopedale. I sent a PM and email yesterday. Please do not throw out!
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Wed Aug 29, 2018 7:46 pm Post subject: |
|
|
No, all boxed up! Sorry, my sound and RTR stuff is getting in the way, am being pulled in 100 directions at once. Sitting here now cleaning up loose ends.
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Wed Aug 29, 2018 8:10 pm Post subject: |
|
|
OK, postage calculated, email sent!
|
|
Back to top |
|
|
jbltecnicspro
Joined: 23 Apr 2016 Posts: 512
|
Link Posted: Wed Aug 29, 2018 10:00 pm Post subject: |
|
|
If I was living at my old place, I'd probably be jumping all over this. Oh well...
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Wed Aug 29, 2018 10:16 pm Post subject: |
|
|
Everything is now gone that I wanted to dump, save for tubes. Will purge those next weekend, as I am out of town this weekend. For those reading, check back Sept 7-8. THe purging will be massive and rapid, no hanging onto tubes for weeks for people waiting to make up their minds.
Minimum price per tube- $15 USd, as I need to buy boxes and bubble wrap to safely ship them. Local pickup is fine.
I've decided to basically only keep Barco 1209/909 tubes and a couple of Marquee 9" sets, perhaps some near mint Sony G90 raw tubes. Everything else goes.
I have perhaps one or two NOS VDC 9500 tubes that I'd sell cheap for a R and G pair. I know I have more reds than greens, so I'd sell the reds at $100 USD each. That's new in the box c/w yokes and the plastic shroud included. Ditto for the one or two greens I have here.
Used with no fungus will be less. I have zero blue tubes for the Marquees, sorry.
Any other 9" tubes, including ones in Barco 1209 (no 's') LC chambers are up for grabs, cheap as well.
|
|
Back to top |
|
|
Pokemon640
Joined: 28 Jul 2015 Posts: 49 Location: Greece
|
Link Posted: Mon Sep 03, 2018 10:29 pm Post subject: |
|
|
i am ready to buy the 9' (G+R) c-elements,
waiting offer for 8' (G+R) c-elements,
About 9" tubes, i'm looking for Green one, Red and Blue is 9/10. (Barco 1209 (no 's') - it's Panasonic P19LCP07 in my case, i remove the barco sticker to find it)
|
|
Back to top |
|
|
|
|