View previous topic :: View next topic |
Author |
Message |
Meemil
Joined: 25 Mar 2016 Posts: 96 Location: Finland
|
Link Posted: Sun Aug 05, 2018 7:46 pm Post subject: Cleaning glycol from pcb |
|
|
Hey,
I've got my hands on this 9500 ultra which has leaking green. I do have replacement bellows for it but it has already dripped some glycol on the HVPS. I also have another old 34kv hvps but would love to fix the soaked 34.9kv if possible.
So far cotton buds have been my tool, but if there's any better way, I'd love to know.
Cheers!
|
|
Back to top |
|
|
gjaky
Joined: 05 Jun 2010 Posts: 2790 Location: Budapest, Hungary
|
Link Posted: Mon Aug 06, 2018 7:21 am Post subject: |
|
|
If it wouldn't be the HVPS, putting the board into diswasher would be the way to go.
_________________ projectors in the past : NEC 6-9PG xtra, Electrohome Marquee 6-7500, NEC XG 1351 LC ( with super modified Electrohome VNB neckboard !!!)
current: VDC Marquee 9500LC
The MOD: VNB-DB, VIM-DB
|
|
Back to top |
|
|
Meemil
Joined: 25 Mar 2016 Posts: 96 Location: Finland
|
Link Posted: Mon Aug 06, 2018 10:00 am Post subject: |
|
|
Alright, i've given the HVPS' daughter board good clean with water, dried carefully and got some interesting results in my old test machine: the red lits up solid but green is very dim and blue flunctuates in brightness. Is this a totally lost cause?
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4379 Location: Phoenix
|
Link Posted: Mon Aug 06, 2018 12:57 pm Post subject: |
|
|
There is hope
Get a pint of Denatured Alcohol and a toothbrush and scrub the boards in the rear of the hvps. Remove the upright board from its' socket and scrub the socket. If the upright board has socketed ICs, pull the ICs out one at a time and clean the sockets and IC legs with alcohol. Scrub the edge connector at the rear of the HVPS, both sides. Scrub the bulkhead connector it mates with. Let everything dry for an hour then try again.
The upright board controls the G2s, and tarnished connectors will give the symptoms you describe. If none of that works I have power supplies I can sell you.
|
|
Back to top |
|
|
Meemil
Joined: 25 Mar 2016 Posts: 96 Location: Finland
|
Link Posted: Sun Aug 12, 2018 12:33 pm Post subject: |
|
|
Oof, I did my best scrub with isopropryl, but it ain't any better.
Are the daugher boards cross compatible? I was thinking of trying the old board in the newer hvps. Or maybe I can spec up the older 34kv with parts from the new supply?
Idk, I'm just terrified of getting one of these overseas, and that soon seems to be the next step.
|
|
Back to top |
|
|
|
|