View previous topic :: View next topic |
Author |
Message |
Artful Dodger
Joined: 22 Jun 2018 Posts: 1 Location: United Kingdom
|
Link Posted: Fri Jun 22, 2018 10:31 pm Post subject: London CRT Projector Repair? (Marquee Ultra Fungus) |
|
|
Hello, I have an Electrohome Marquee 9500 LC Ultra that has started gathering “fungus” on the blue and green guns. Does anyone know of anyone in London, UK that could help me out repairing it. I love CRT projectors and use them in exhibitions, but am afraid of destroying it if I try myself. Any help much appreciated.
Also recently when I turn it off the blue produces this weird ghostly soft firework. Is this something to worry about??
Cheers.
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Fri Jun 22, 2018 10:57 pm Post subject: |
|
|
You're most likely on your own, CRT is for all intents and purposes dead, so everything is DIY. There was a guy named Andy in London, but I haven't heard from him in years.
There's instructions on the main site how to defungus the tubes. I have a brand new G and R tube that I'd sell for $450 USD for the pair, plus about $160 shipping to you. NEw in the box, 2011 vintage. I do not have any blues though.
Your blue tube has electron contamination in the gun, if the blacks are still black without flickering, ignore it and continue using it.
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4379 Location: Phoenix
|
Link Posted: Sat Jun 23, 2018 3:04 am Post subject: |
|
|
Hello
Get a quart of household ammonia and some distilled water. Pull the tubes out, drain the coolant, flush with distilled water, then slosh some ammonia around in the coolant chamber for twenty minutes. Flush again with distilled water and put in fresh glycol. It's that simple. It's the technique i now use.
Also go to stainless steel fill hole screws if not already.
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Tue Jul 03, 2018 1:27 am Post subject: |
|
|
I haven't worked across the pond for a while, but I'd go. Tricky part is you'd need to cover the travel expense.
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
|
|