View previous topic :: View next topic |
Author |
Message |
ElTopo
Joined: 07 Nov 2006 Posts: 1608
|
Link Posted: Sat Dec 02, 2017 2:49 pm Post subject: Barco 909 G2 problem on blue tube |
|
|
Hi guys,
i have a Barco 909 which seems to have some G2 issue on the blue tube.
Meaning that with full brightness down i still have a glowing backlight.
How can G2 be set on the 909 ?
thanks in advance
ElTopo
_________________ Barco Cine 9 the one and only
|
|
Back to top |
|
|
Hulio
Joined: 15 Apr 2006 Posts: 469 Location: Belgium
|
Link Posted: Sat Dec 02, 2017 3:46 pm Post subject: |
|
|
No G2 adjustments in BR909.
Move the RGB end-stage to other tube to see if problem follows.
|
|
Back to top |
|
|
Hulio
Joined: 15 Apr 2006 Posts: 469 Location: Belgium
|
Link Posted: Sat Dec 02, 2017 4:06 pm Post subject: |
|
|
Right, before you do that, try another SMPS2+G2 board. It takes less time than swapping neckboards.
The G2 voltage is generated there....
|
|
Back to top |
|
|
|
|