CurtPalme.com Home Theater Forum

Wognose · Joined: 27 Jan 2011 Posts: 19 Location: Perth WA

I have recently removed my Sony G70 from my theatre. I had the controller that's usually mounted on top of the projector attached to the wall in the theatre instead. When I removed the g70 the wire that connects the projector to the controller got pulled and the wires came out of the little connector. I want to fix it but don't know which wire connects where and I really don't want to break the projector as I want it's next owner to get as much enjoyment out of it as I did. Could any with the same project please take a photo of the connector showing the order of the wires or if someone could point me in the right direction to work this out, it would be greatly appreciated. Thanks

AFryia · Posted: Thu Jan 05, 2017 11:37 pm Post subject:

I'm not sure exactly the connector you are looking for.

Can you post a picture?

jbltecnicspro · Joined: 23 Apr 2016 Posts: 512

If you're talking about the remote, a standard 3.5mm jack will work just fine.

Wognose · Joined: 27 Jan 2011 Posts: 19 Location: Perth WA

No I mean the controller that's wired to the unit, I will try take a photo later today so you can see what I mean. Thanks

Wognose · Joined: 27 Jan 2011 Posts: 19 Location: Perth WA

These are attachments showing the wires and where the connector plugs into, I just need to know the order of the wires to the connector. if someone could take a photo of their connector that would be fantastic. thanks

cmjohnson · Joined: 03 Apr 2006 Posts: 5180 Location: Buried under G90s

Here's your answer.

Wognose · Joined: 27 Jan 2011 Posts: 19 Location: Perth WA

Thank you, thank you, thank you you're awesome! I'll keep you posted how I go.