View previous topic :: View next topic |
Author |
Message |
patrickoneal
Joined: 16 Feb 2012 Posts: 2
|
Link Posted: Mon Sep 07, 2015 4:59 pm Post subject: Quick questions about my Lumagen 2020 and Chromapure |
|
|
Hello,
I recently started learning to use my Lumagen 2020, Chromapure with autocalibrate, and Display 3 pro with my Benq W6000 projector, and I have a couple of quick questions:
1. I want to improve my results by tweaking the onboard CMS on the projector, and running autocalibrate again. If I use the test patterns on the Lumagen 2020, are they filtered through the 3D LUT saved to the 2020 from my initial calibration attempt? Or, do they go unmolested to the projector?
2. I'm not even sure I saved the initial calibration to the 2020. After Chromapure finishes and the report is generated, do I need to do something to save the information to the 2020?
Thanks for any help you may provide. I'm sure I'll have a few more questions.
|
|
Back to top |
|
|
TomHuffman
Joined: 01 Jun 2010 Posts: 76 Location: Springfield, MO
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Wed Sep 09, 2015 3:14 pm Post subject: Re: Quick questions about my Lumagen 2020 and Chromapure |
|
|
patrickoneal wrote: |
1. I want to improve my results by tweaking the onboard CMS on the projector, and running autocalibrate again. If I use the test patterns on the Lumagen 2020, are they filtered through the 3D LUT saved to the 2020 from my initial calibration attempt? Or, do they go unmolested to the projector? |
When you go to test patterns in the Lumagen there is an option for "reference" patterns and for "adjustable" patterns. Reference patterns are unmolested patterns as if from a pattern generator without the Lumagen LUT. The adjustable patterns are with the Lumagen adjustments applied.
So use adjustable patterns when doing anything by hand inside the Lumagen. Use reference if you want to make changes in the projector without the Lumagen altering the signal.
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
|
|