View previous topic :: View next topic |
Author |
Message |
the_avguy
Joined: 16 Mar 2007 Posts: 91 Location: Edmonton, Alberta
|
Link Posted: Tue Aug 11, 2015 4:31 am Post subject: help please - optoma ep729 dead bulb |
|
|
hello all,
Been rather busy lately and not much time to play with the projectors.
I got an Optoma EP 729 I want to set up for the kids but it shows the bulb as dead.
It turns on the fan comes on and then after a while the projector turns off and the dead lamp light comes on.
I have verified that the rest of the projector works by pulling the bulb and shining a LED flashlight through the opening.
The picture is there and it switches sources etc. with no problem.
I ordered and received a new lamp with housing but when I swapped it in the same thing happens.
I guess the new lamp could be dead but before I send it back and get stuck with possibly paying shipping I was wondering if there is any thing else to check.
any help appreciated.
_________________ working ECP 4100.
marquee still in pieces, just gathering knowledge.
optoma ep729
|
|
Back to top |
|
|
ecrabb Forum Moderator
Joined: 13 Mar 2006 Posts: 15909 Location: Utah
TV/Projector: JVC RS40, Epson 5010
|
Link Posted: Wed Aug 12, 2015 4:41 pm Post subject: |
|
|
It's probably the lamp ballast. It's a pretty common failure in digital projectors. No clue what to do for testing or replacement, but just relating what I've read in a number of digital projector threads.
SC
|
|
Back to top |
|
|
the_avguy
Joined: 16 Mar 2007 Posts: 91 Location: Edmonton, Alberta
|
Link Posted: Wed Aug 12, 2015 5:16 pm Post subject: |
|
|
I was afraid of that.
Looks like I might have to have a go at replacing the lamp with an LED.
_________________ working ECP 4100.
marquee still in pieces, just gathering knowledge.
optoma ep729
|
|
Back to top |
|
|
|
|