View previous topic :: View next topic |
Author |
Message |
Jeremy112
Joined: 28 Sep 2006 Posts: 2645 Location: Fond du Lac, WI
|
Link Posted: Sun May 03, 2015 1:40 pm Post subject: |
|
|
What model quadro are you looking for? and AGP or PCIe? specific video outputs?
_________________ When I'm asking for a Model number, that doesn't mean I'm asking for a nude photo with your number on it
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Sun May 03, 2015 3:23 pm Post subject: |
|
|
Jeremy112 wrote: | What model quadro are you looking for? and AGP or PCIe? specific video outputs? |
PCIe, single or dual slot, 2xDVI-I so I can run RGBHV out to two projectors.
A 3700 card just came up. I'll see if I can snag it this week.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
gjaky
Joined: 05 Jun 2010 Posts: 2790 Location: Budapest, Hungary
|
Link Posted: Sun May 03, 2015 6:25 pm Post subject: |
|
|
I looked in this some time back too, and I found that despite the blending capability is advertised all over on these older quadro boards, but that is/was simply driver support feature. Meaning you have to make your own application (programming the driver) for the blending, and I couldn't find any ready-made solution for blending application on quadro cards.
_________________ projectors in the past : NEC 6-9PG xtra, Electrohome Marquee 6-7500, NEC XG 1351 LC ( with super modified Electrohome VNB neckboard !!!)
current: VDC Marquee 9500LC
The MOD: VNB-DB, VIM-DB
|
|
Back to top |
|
|
koldby
Joined: 07 Feb 2007 Posts: 126 Location: Denmark
TV/Projector: GJAKY modded VDC marquee 9500lc ultra
|
Link Posted: Sun May 03, 2015 6:56 pm Post subject: |
|
|
gjaky wrote: | I looked in this some time back too, and I found that despite the blending capability is advertised all over on these older quadro boards, but that is/was simply driver support feature. Meaning you have to make your own application (programming the driver) for the blending, and I couldn't find any ready-made solution for blending application on quadro cards. |
Really?
How about this:
http://www.edge-blending.com/
Koldby
|
|
Back to top |
|
|
gjaky
Joined: 05 Jun 2010 Posts: 2790 Location: Budapest, Hungary
|
Link Posted: Sun May 03, 2015 7:02 pm Post subject: |
|
|
koldby wrote: | gjaky wrote: | I looked in this some time back too, and I found that despite the blending capability is advertised all over on these older quadro boards, but that is/was simply driver support feature. Meaning you have to make your own application (programming the driver) for the blending, and I couldn't find any ready-made solution for blending application on quadro cards. |
Really?
How about this:
http://www.edge-blending.com/
Koldby |
Looks good, but I don't see why this only would work on nVidia Quadro cards...
I think Jeremy's intent to buy a Quadro card with the hope it will do blend on its own without the need of any additional expensie software, I just wanted to say it probably won't do that.
_________________ projectors in the past : NEC 6-9PG xtra, Electrohome Marquee 6-7500, NEC XG 1351 LC ( with super modified Electrohome VNB neckboard !!!)
current: VDC Marquee 9500LC
The MOD: VNB-DB, VIM-DB
|
|
Back to top |
|
|
koldby
Joined: 07 Feb 2007 Posts: 126 Location: Denmark
TV/Projector: GJAKY modded VDC marquee 9500lc ultra
|
Link Posted: Sun May 03, 2015 8:04 pm Post subject: |
|
|
gjaky wrote: | koldby wrote: | gjaky wrote: | I looked in this some time back too, and I found that despite the blending capability is advertised all over on these older quadro boards, but that is/was simply driver support feature. Meaning you have to make your own application (programming the driver) for the blending, and I couldn't find any ready-made solution for blending application on quadro cards. |
Really?
How about this:
http://www.edge-blending.com/
Koldby |
Looks good, but I don't see why this only would work on nVidia Quadro cards...
I think Jeremy's intent to buy a Quadro card with the hope it will do blend on its own without the need of any additional expensie software, I just wanted to say it probably won't do that. |
Neither can I, but that is not a drawback , is it?
Koldby
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Sun May 03, 2015 8:06 pm Post subject: |
|
|
gjaky wrote: | koldby wrote: | gjaky wrote: | I looked in this some time back too, and I found that despite the blending capability is advertised all over on these older quadro boards, but that is/was simply driver support feature. Meaning you have to make your own application (programming the driver) for the blending, and I couldn't find any ready-made solution for blending application on quadro cards. |
Really?
How about this:
http://www.edge-blending.com/
Koldby |
Looks good, but I don't see why this only would work on nVidia Quadro cards...
I think Jeremy's intent to buy a Quadro card with the hope it will do blend on its own without the need of any additional expensie software, I just wanted to say it probably won't do that. |
That's what summer nights and experimenting are for ( in between working outs and fixing curb find electronics lol )
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
koldby
Joined: 07 Feb 2007 Posts: 126 Location: Denmark
TV/Projector: GJAKY modded VDC marquee 9500lc ultra
|
Link Posted: Sun May 03, 2015 8:07 pm Post subject: |
|
|
I donnīt think $99 is expensive, do you?
_________________ What is home theater without good sound?
|
|
Back to top |
|
|
koldby
Joined: 07 Feb 2007 Posts: 126 Location: Denmark
TV/Projector: GJAKY modded VDC marquee 9500lc ultra
|
Link Posted: Sun May 03, 2015 9:04 pm Post subject: |
|
|
I would love to hear from somebody that actually did try that software. There is a free trial version, where you just cannot save your settings.
I am going to give it a try myself, but I donīt have two PJīs yet.
During summer I will have two so I can play with it, but of course I would be happy to see others try it out too.
Koldby
_________________ What is home theater without good sound?
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Sun May 03, 2015 9:11 pm Post subject: |
|
|
koldby wrote: | I donnīt think $99 is expensive, do you? |
I spend that at the surplus store without trying
koldby wrote: | I would love to hear from somebody that actually did try that software. There is a free trial version, where you just cannot save your settings.
I am going to give it a try myself, but I donīt have two PJīs yet.
During summer I will have two so I can play with it, but of course I would be happy to see others try it out too.
Koldby |
No shortage of projectors here, just a shortage of time.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
koldby
Joined: 07 Feb 2007 Posts: 126 Location: Denmark
TV/Projector: GJAKY modded VDC marquee 9500lc ultra
|
Link Posted: Sun May 03, 2015 9:38 pm Post subject: |
|
|
AnalogRocks wrote: |
No shortage of projectors here, just a shortage of time. |
LOL
And somtimes time is more expensive than projectors
Even CRTīs
Still please give it a try when you have the time..
Koldby
_________________ What is home theater without good sound?
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Sun May 03, 2015 9:58 pm Post subject: |
|
|
koldby wrote: | AnalogRocks wrote: |
No shortage of projectors here, just a shortage of time. |
LOL
And somtimes time is more expensive than projectors
Even CRTīs
Still please give it a try when you have the time..
Koldby |
Like I said. Have the old dual core AMD box sitting there all I need is the Quadro card and some software and two of my many halloween projectors.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
racerxnet
Joined: 20 Jun 2007 Posts: 362 Location: Illinois
|
Link Posted: Fri Dec 04, 2015 7:03 pm Post subject: |
|
|
I have a couple of old Quadro cards laying around if you are still interested. Not sure if they are AGP or PCI. Havent looked in ages. You can have em for the cost of shipping. Both the same model number.
Mark
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Sat Dec 05, 2015 7:06 am Post subject: |
|
|
racerxnet wrote: | I have a couple of old Quadro cards laying around if you are still interested. Not sure if they are AGP or PCI. Havent looked in ages. You can have em for the cost of shipping. Both the same model number.
Mark |
Please let me know the model. I haven't had a chance to find one locally as one ashat decided to list his at $250 and all of a sudden they were all that price. Happens on eBay too.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
racerxnet
Joined: 20 Jun 2007 Posts: 362 Location: Illinois
|
Link Posted: Sat Dec 05, 2015 9:22 pm Post subject: |
|
|
The cards are Nvidia Quadro 3000 AGP cards. Have 2 of them. Each has 2 DVI, Frame Lock, House sync, and Svideo connection. I had these when I wrote software for a blend application. If you don't want them I'll toss them in the trash.
MAK
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Sun Dec 06, 2015 12:01 am Post subject: |
|
|
racerxnet wrote: | The cards are Nvidia Quadro 3000 AGP cards. Have 2 of them. Each has 2 DVI, Frame Lock, House sync, and Svideo connection. I had these when I wrote software for a blend application. If you don't want them I'll toss them in the trash.
MAK |
You wound an electronics hoarder with your words. LOL
I'll shoot you a pm with my address.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Thu Jan 21, 2016 4:46 am Post subject: |
|
|
Found two 4600 cards locally. Emailed the guy that I'd take both then he sold one on me. BUT he still has one left. So we'll see if I can score this one.
NOW onto the PC build. Help me spec a PC for Win7 64 bit 2 x 4600 Quadro cards.
How much RAM?
Which Motherboard?
Which Power Supply?
etc.....
I'll be building it in a Cooler Master HAF XB EVO ATX Case. SO full size MB is a go
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Fri Jan 22, 2016 11:11 am Post subject: |
|
|
My collection is now heavy by one HP Quadro 4600 PCIe card. Now to build a newer PC to support it. I'll stick it in my old dual core box for testing hopefully this weekend.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Thu Jan 28, 2016 3:33 am Post subject: |
|
|
AnalogRocks wrote: | My collection is now heavy by one HP Quadro 4600 PCIe card. Now to build a newer PC to support it. I'll stick it in my old dual core box for testing hopefully this weekend. |
Well this didn't work out too well. The motherboard died. No Problem I have a spare. Get the spare out and the capacitors have leaked out.
Anyone got a Socket 939 AMD MiniATX motherboard with 1, 16xPCIe and a regular PCI slot on it? I need to get my WinXP gaming box back goin' again.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
hal
Joined: 28 Nov 2012 Posts: 100
|
Link Posted: Sun Feb 21, 2016 6:34 pm Post subject: |
|
|
AnalogRocks, any updates?
|
|
Back to top |
|
|
|
|