Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

To tin or not to tin? (bare speaker wire that is)

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Home Theater Design & Construction
View previous topic :: View next topic  
Author Message
paw




Joined: 08 Mar 2006
Posts: 1176
Location: Arvada, CO


PostLink    Posted: Mon Dec 29, 2014 1:39 am    Post subject: To tin or not to tin? (bare speaker wire that is) Reply with quote


        Register to remove this ad. It's free!
With my surrounds, I'm going to have to use bare speaker wire. There's just not enough room for banana plugs.

Should I tin the wire? Should I just tin the very end to keep the strands together?

_________________
Aubrey
Back to top
View user's photo album (8 photos)
Curt Palme
CRT Tech



Joined: 08 Mar 2006
Posts: 24296
Location: Langley, BC

TV/Projector: All of them!


PostLink    Posted: Mon Dec 29, 2014 1:50 am    Post subject: Reply with quote

We just had this discussion on a Facebook audio install forum. The consensus was a solid NO, as the weak spot of the wire then is right where the wire goes into the jacket, but my argument is that if the wire isn't being flexed, then I'd tin it to prevent thin strands from shorting together. One guy also said that the tinning makes the copper less malleable, and that solder will shrink slightly over time, reducing connection of the compression fit as compared to the bare wire.

While his argument made sense, I personally will still at least solder the tip, to prevent fraying, leaving the rest of the wire untinned.
Back to top
macgyver655




Joined: 22 Aug 2007
Posts: 8508



PostLink    Posted: Mon Dec 29, 2014 1:59 am    Post subject: Reply with quote

Geez, they make it sound like it is some high powered connection.

Seriously, the wire gauge is generally substantially larger then the signal requires and any "supposed" loss from the claims made would be a non affect.

If they want to complain about something, tell them to look at the factory wiring and connections "inside" a speaker cabinet, LOL.

And when you are done with that, tell them to look at the factory wiring and connections of the speaker assembly itself. Then ask again if tinning affects anything, LOL LOL!
Back to top
macgyver655




Joined: 22 Aug 2007
Posts: 8508



PostLink    Posted: Mon Dec 29, 2014 2:00 am    Post subject: Reply with quote

Oh, and then you can add that every component connection (resistor, capacitor, transistor,diode, IC) in the signal path inside the amplifier is essentially "tinned", LOL.
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Home Theater Design & Construction All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum