Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!


Lumagen Radiance / Radiance 20XX-21xx Firmware Updates
Goto page Previous  1, 2
 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Lumagen Products
View previous topic :: View next topic  
Author Message
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Fri Aug 29, 2014 6:47 pm    Post subject: Reply with quote


        Register to remove this ad. It's free!
Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 081514 Firmware Update

Release Notes

Added 17x17x17 CMS (4.913 Color Points) along with corresponding menu and rs232 command options.

Added option to enable Darbee enhancement for just 2d or just 3d sources.

If you back up your setup to a PC Be sure to download the new configuration (v1.8) utility from the Lumagen Utilities page to use with your Radiance 21xx. (Update time ~15 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Sat Aug 30, 2014 7:00 am    Post subject: Reply with quote

Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 081514 Firmware Update

Release Notes

Added faster serial port IO to enable faster operation with calibration software. (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081514 Firmware Update

Release Notes

Added option to enable Darbee enhancement for just 2d or just 3d sources. (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Mon Sep 01, 2014 6:37 am    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081614 Firmware Update

Release Notes

Added option to enable Darbee enhancement for just 2d or just 3d sources. (Update time ~15 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Wed Sep 03, 2014 6:36 am    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081714 Firmware Update

Release Notes

The audio configuration menu had lost the spdif/coax selectable options from 050114-081614 in 20xx models only. (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Wed Sep 03, 2014 9:44 pm    Post subject: Reply with quote

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 081814 Firmware Update

Release Notes

Location values for 17x17x17 gamut adjustment via the menu were off by 1 for a few locations due to a rounding error. (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Thu Sep 04, 2014 1:33 am    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081814 Firmware Update

Release Notes

Location values displayed for 9x9x9 gamut adjustment via the menu were off by 1 for a couple locations due to a rounding error. (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Mon Sep 08, 2014 8:52 pm    Post subject: Reply with quote

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 082014 Firmware Update

Release Notes

Bugfix for configuring analog composite inputs (2143, 2144 only). The menu would show settings being made for these inputs without corresponding changes to the picture. (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Sat Sep 20, 2014 9:08 am    Post subject: Reply with quote

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 091014 Firmware Update

Release Notes

Fix for a bug which under some circumstance could give strange colors in grayscale intermittently. (Update time ~15 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Tue Sep 23, 2014 6:42 am    Post subject: Reply with quote

Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 091114 Firmware Update

Release Notes

Fix for a bug which under rare circumstances could give strange colors in grayscale that a user may have remedied by turning off and back on. (Update time ~9 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 091114 Firmware Update

Release Notes

Fix for a bug which under rare circumstances could give strange colors in grayscale that a user may have remedied by turning off and back on. (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 091114 Firmware Update

Release Notes

Fix for an issue that changes a 17x17x17 CMS to an 8 point CMS when copying from a CMS location to another. (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Sat Sep 27, 2014 9:33 pm    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 091214 Firmware Update

Release Notes

Fix for an issue in 091114 having problems with 480/576p reinterlacing giving blank screen or green/pink colors.

Fix for an issue with the test pattern color when editing the color gamut via the menu. (Update time ~15 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Thu Oct 09, 2014 10:35 pm    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 100514 Firmware Update

Release Notes

Fix for not being able to power up on an analog input. This update is only helpful for units with analog inputs (2022/2042). (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 100514 Firmware Update

Release Notes

Fix for not correctly handling Pal (576i) video on analog inputs and not being able to power up on an analog input. This update is only helpful for units with analog inputs (2124/2144). (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Wed Oct 29, 2014 2:56 pm    Post subject: Reply with quote

Owner's Manual for Radiance 2020 Video Processor is now available for download here: http://www.lumagen.com/testindex.php?module=manuals
_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Tue Nov 04, 2014 8:18 pm    Post subject: Reply with quote

Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 103114 Firmware Update

Release Notes

Fix for output setup issue with being unable to select desired Style after being previously set.

Added 24 Hz to the direct vertical rate command ("menu 04"). (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 103114 Firmware Update

Release Notes

Fix for output setup issue with being unable to select desired Style after being previously set.

Fix for auto aspect when "Letterbox Zoom" was set to off and would do a zoom step for 2.40 and 1.85 sources.

Added 24 Hz to the direct vertical rate command ("menu 04"). (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 103114 Firmware Update

Release Notes

Fix for an issue with optional CRT 3D glasses emitter.

Fix for output setup issue with being unable to select desired Style.

Fix for auto aspect when "Letterbox Zoom" was set to off and would do a zoom step for 2.40 and 1.85 sources.

Added 24 Hz to the direct vertical rate command ("menu 04"). (Update time ~15 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Wed Nov 05, 2014 11:40 pm    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2020,2021, 2022, 2041, 2042) New 110114 Firmware Update

Release Notes

Fixed issue where setting hotplug to always on could result in video not turning on for output. (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 110114 Firmware Update

Release Notes

Fixed issue where setting hotplug to always on could result in video not turning on for output. (Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Wed Nov 05, 2014 11:44 pm    Post subject: Reply with quote

Lumagen Radiance Configuration utility Version 1.81 for the Radiance XD/XE/XS/Mini/20XX/21XX

This is a PC windows application useful for several tasks:

Backup/restore your setup by downloading/uploading to your PC.

Share your configuration with other users or Lumagen to solve problems.

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Fri Jan 30, 2015 7:42 pm    Post subject: Reply with quote

Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 012515 Firmware Update

Release Notes

Fix for loss of video issues with chromebox and other HTPC type sources. Fix for constant height setup with certain 3D formats and scale bias off causing incorrect picture. Fix for test patterns with side-by-side or top-bottom 3D output. Expanded size limits for rs232 "ZY2" command to match onscreen menu limits. (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 012515 Firmware Update

Release Notes

Adds composite input option to 2022/2042 component inputs. Improvements to auto aspect detection. Added auto aspect detection capability to analog inputs (2022/2042). Fix for loss of video issues with chromebox and other HTPC type sources. Fix for constant height setup with certain 3D formats and scale bias off causing incorrect picture. Fix for test patterns with side-by-side or top-bottom 3D output. Expanded size limits for rs232 "ZY2" command to match onscreen menu limits. (Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 012515 Firmware Update

Release Notes

Fix for an issue with factory reset after enabling 17x17x17 CMS that would give incorrect colors. Adds composite input option to 2124/2144 component inputs. Improvements to auto aspect detection. Added auto aspect detection capability to analog inputs (2124/2144). Fix for composite input with film mode selected. Fix for loss of video issues with chromebox and other HTPC type sources. Fix for constant height setup with certain 3D formats and scale bias off causing incorrect picture. Fix for test patterns with side-by-side or top-bottom 3D output. Expanded size limits for rs232 "ZY2" command to match onscreen menu limits. (Update time ~15 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Tue Jan 19, 2016 9:04 pm    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2020, 2021, 2022, 2041, 2042) New 011216 Firmware Update

Release Notes

Adds rs232 input aspect query command, "ZQI20".

Adds rs232 full information query command, "ZQI21".

Adds rs232 command, "ZY550" to reset automatic aspect detection which is useful if user temporarily overrides it and then wants to re-detect automatically.

Adds "Full" option to reporting mode changes via rs232 in menu under "Other: I/O Setup: RS-232 Setup".

Fixes output aspect per input aspect problem with 2.40 input aspect using the 2.35 output aspect.

Adds improvements to automatic image based input aspect such that detection is more reliable and also will unzoom to display DVD setup menus, etc when they are detected.

If you need documentation on the new rs232 commands before our rs232 tech tip is updated please email us at support@lumagen.com .

(Update time ~15 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 011216 Firmware Update

Release Notes

Adds rs232 input aspect query command, "ZQI20".

Adds rs232 full information query command, "ZQI21".

Adds rs232 command, "ZY550" to reset automatic aspect detection which is useful if user temporarily overrides it and then wants to re-detect automatically.

Adds "Full" option to reporting mode changes via rs232 in menu under "Other: I/O Setup: RS-232 Setup".

Fixes output aspect per input aspect problem with 2.40 input aspect using the 2.35 output aspect.

Adds improvements to automatic image based input aspect such that detection is more reliable and also will unzoom to display DVD setup menus, etc when they are detected.

If you need documentation on the new rs232 commands before our rs232 tech tip is updated please email us at support@lumagen.com .

(Update time ~15 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Wed Jan 20, 2016 8:39 pm    Post subject: Reply with quote

Lumagen Radiance 20XX Series (2020, 2021, 2022, 2041, 2042) New 011316 Firmware Update

Release Notes

The newly added ZY550 rs232 command wasn't working too well and was fixed.

The ZQI21 command returned incorrect vres for 4K output modes.

If you aren't using these rs232 commands then you do not need to update.

(Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 011316 Firmware Update

Release Notes

The newly added ZY550 rs232 command wasn't working too well and was fixed.

The ZQI21 command returned incorrect vres for 4K output modes.

If you aren't using these rs232 commands then you do not need to update.

(Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
ConnecTED



Joined: 02 Jun 2014
Posts: 53
Location: Athens, Greece


PostLink    Posted: Wed Oct 12, 2016 8:57 pm    Post subject: Reply with quote

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 100516 Firmware Update

Release Notes

Small improvements from Radiance Pro auto image aspect detection were added.

(Update time ~3 minutes @57k)

Download Link

_________________
Ted's LightSpace CMS Calibration Disk

S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Lumagen Products All times are GMT
Goto page Previous  1, 2
Page 2 of 2
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum