View previous topic :: View next topic |
Author |
Message |
hjhjr
Joined: 28 Apr 2008 Posts: 27 Location: Louisiana
|
Link Posted: Sat Jun 14, 2014 4:21 am Post subject: moome fullhd V3 HDMI V1.3 card for Marquee |
|
|
I sent My card to Moome to be repaired. He replaced the red DAC. It works with my dishnet at 1080i but when I switch to my Roku at 720P the green tube is overdriven and the picture is washed our green. The remote does not work. Any comment appreciated.
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Sat Jun 14, 2014 2:04 pm Post subject: Re: moome fullhd V3 HDMI V1.3 card for Marquee |
|
|
hjhjr wrote: | I sent My card to Moome to be repaired. He replaced the red DAC. It works with my dishnet at 1080i but when I switch to my Roku at 720P the green tube is overdriven and the picture is washed our green. The remote does not work. Any comment appreciated. |
It sounds like one of the two sources is not in the correct color space to match it's info frame. My guess is that Dish is using CyCbr 444 and that the Roku is using RGB or the opposite.
You can manually change color spaces in the Moome card to test the theory. If that works than something isn't communicating correctly in your system.
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
hjhjr
Joined: 28 Apr 2008 Posts: 27 Location: Louisiana
|
Link Posted: Tue Jun 17, 2014 10:51 pm Post subject: |
|
|
I contacted Moome, after several e-mails he said check the IR receiver. I resoldered the IR receiver pins. That solved my problem. The card works normally no more green overdrive after pushing button #4.
|
|
Back to top |
|
|
|
|