Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

moome fullhd V3 HDMI V1.3 card for Marquee

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Moome Products
View previous topic :: View next topic  
Author Message
hjhjr




Joined: 28 Apr 2008
Posts: 27
Location: Louisiana


PostLink    Posted: Sat Jun 14, 2014 4:21 am    Post subject: moome fullhd V3 HDMI V1.3 card for Marquee Reply with quote


        Register to remove this ad. It's free!
I sent My card to Moome to be repaired. He replaced the red DAC. It works with my dishnet at 1080i but when I switch to my Roku at 720P the green tube is overdriven and the picture is washed our green. The remote does not work. Any comment appreciated.
Back to top
CIR Engineering




Joined: 25 Aug 2008
Posts: 4264
Location: Chicago USA & Berlin Germany


PostLink    Posted: Sat Jun 14, 2014 2:04 pm    Post subject: Re: moome fullhd V3 HDMI V1.3 card for Marquee Reply with quote

hjhjr wrote:
I sent My card to Moome to be repaired. He replaced the red DAC. It works with my dishnet at 1080i but when I switch to my Roku at 720P the green tube is overdriven and the picture is washed our green. The remote does not work. Any comment appreciated.

It sounds like one of the two sources is not in the correct color space to match it's info frame. My guess is that Dish is using CyCbr 444 and that the Roku is using RGB or the opposite.

You can manually change color spaces in the Moome card to test the theory. If that works than something isn't communicating correctly in your system.

craigr

_________________
*NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying Wink
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
Back to top
hjhjr




Joined: 28 Apr 2008
Posts: 27
Location: Louisiana


PostLink    Posted: Tue Jun 17, 2014 10:51 pm    Post subject: Reply with quote

I contacted Moome, after several e-mails he said check the IR receiver. I resoldered the IR receiver pins. That solved my problem. The card works normally no more green overdrive after pushing button #4.
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Moome Products All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum