Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

AMX Keypad Programming

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Home Theater Accessories
View previous topic :: View next topic  
Author Message
BGSPCS




Joined: 23 Aug 2006
Posts: 115
Location: Pottstown, PA


PostLink    Posted: Mon Feb 17, 2014 3:15 am    Post subject: AMX Keypad Programming Reply with quote


        Register to remove this ad. It's free!
Hello Everyone,

I have been slowly building an AMX control system to control all of the bits of AV HT equipment that i have. Sometime last year someone I know gave me globs of AMX hardware, 5 touch panels, 3 Netlinx Processors, 2 Axcess processors, rf/ir remotes, receivers and just LOTS of stuff. The hardware i am using are 2 touch panels, and a Netlinx NL-3000 with FW2.31.141. I have got control working to 5 IR devices, and 3 serial devices(Zeneth 1200x, and Onkyo receiver, and Extron Matrix Switcher). I have all of the touch panels working, however i cannot figure out how to get the AMX keypad to work.

The keypad in question is an older ICSNet PLK-MSP8 (http://www.amx.com/products/PLK-MSP8.asp) I can connect it to the Netlinx, and it will see it and show that i has FW 5.0, i can adjust the ID and the Netlinx status light flashes for each button press. What i can't figure out is how to get the netlinx to respond to it, Events don't appear to come through as channels like the touch panels. I figure i would post here and see if anyone has dealt with these keypads with an NL controller, or maybe someone here is an AMX programmer that could point me in the direction i need to go. I haven't found any documentation on how to use the keypad, but there might be a module i have to use to program the keypad.


Any suggestions, or direction pointing would be greatly appreciated.



Brad

_________________
--
Brad S
Pottstown PA
Back to top
Kevin D




Joined: 23 Nov 2007
Posts: 63



PostLink    Posted: Sat Apr 05, 2014 9:28 pm    Post subject: Reply with quote

The PLK-MSP8 is a native Phast device. You will need a device module to control it. PM if you do not have access to the InConcert device section.

Kevin D.
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Home Theater Accessories All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum