View previous topic :: View next topic |
Author |
Message |
HD-DAVE
Joined: 16 Feb 2007 Posts: 223 Location: Delta, BC
|
Link Posted: Mon Feb 10, 2014 12:41 am Post subject: R.I.P. HDMI0 Port on my Moome XG-Full HD board :-( |
|
|
Watching Inception last night on my XG and all of a sudden lost the image - was cabled to the HDMI port 0. LED on the left side lit up in red. Switched over to port 1 and luckily it still works. Today i spent half and hour going over the board with a microscope/20x/30x magnifier and found what look to be two "factory" flaws; first thing i noticed was pcb damage around one of the 8 pin surface mount resistor packs on one side of the board - the fibreglas around the copper pads for the pack are strangely "chewed out"...very weird, but all traces looked ok though. Then I found what was more likely to have killed it...there was a tiny thin curved metal fragment less than 1/8" long that was jammed at one end of the pcb connection to HDMI0...was resting between the end most pin and the metal frame...may have been like that for years since manufacture, or maybe it got ingested into my xg somehow.
Does anyone know a way to interrogate the board so i can find out what the fault is ?
I am a little uncomfortable being down to only one working port - and a potentially compromised/weakened board - has anyone got a spare XG card they would want to part with ?
Thanks,
Dave
|
|
Back to top |
|
|
HD-DAVE
Joined: 16 Feb 2007 Posts: 223 Location: Delta, BC
|
Link Posted: Mon Feb 10, 2014 12:56 am Post subject: |
|
|
OMG... cancel red alert. HDMI0 is still working after all. For years i had been simply powering on the XG, pressing 4 on the remote and the image from the moome came up abra cadabra style. I had kinda forgotten about the fact that there was a remote for the moome...found it and after switching the cable over to HDMI0 and pressing the 1 and 2 buttons i have an image again.
Whew what a relief !
Thinking back to last night i think i was changing the vol up or down when i lost the image , the IR from my reciever remote may have triggered the moome card by accident...which is weird tho because the moome card is not even in line of sight.
...Dave
|
|
Back to top |
|
|
winny
Joined: 09 Oct 2013 Posts: 403 Location: Sweden
TV/Projector: BD808s, BG1209/2
|
Link Posted: Mon Feb 10, 2014 9:37 am Post subject: |
|
|
Ah, the IR dilemma. Have you ever had a laptop with IRDA standing in the room and all of the sudden your TV starts to switch channel, turn off, eject your VCR and those kind of things? I though I was haunted or the receiver of an elaborate practical joke before finding out about the laptop.
_________________
Melifluonze wrote: | Digital is easy. This is torture, but far more interesting... |
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Mon Feb 10, 2014 8:07 pm Post subject: |
|
|
I've had similar issues with the color space being changed on the Sony input cards. A client does something in the room with another remote and all of a sudden the colors on their screen are all wrong.
I would get that small metal fragment off the board though
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
|
|