View previous topic :: View next topic |
Author |
Message |
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Fri Aug 09, 2013 3:03 am Post subject: $25 stripper |
|
|
Pics and info added about the splitter
just thought i'd share... im on a super limited budget and cant afford a proper standalone v processor , moome fury ect ATM so i gambled with one of these
https://www.ebay.com/?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5336656890&toolid=20008&mkevt=1
lukily i had a vga to 5bnc laying around so no extra outlay there... and .... it worked!!!! WOW! not bad for 10 bucks i use my receiver for switching / scaling so needed a simple/cheap solution.... now you must take this with a grain of salt.... IT DOES NOT STRIP HDCP!!!!! so you may still have an issue there but i'll be updating this tread soon as I've just ordered an active 1 in 2 out hdmi splitter that's rumored to strip HDCP... then BAM!!! fingers crossed....
i still have hdcp running around my v chain so i plugged the hdmi to vga to bnc direct from the digital set top box (china non hdcp special) to projector and got 1080i @ 50 (my cine 7 poops itsself at 1080P so i dont go there )
As a side note Ive had to result to this as unfortunately im one of the people that HDCP affected incorrectly... I take pride in buying / hiring all my movies / Blurays as originals its something for me to look forward too... its just the v chain im using makes HDCP think im a thief... the Splitter cost me $20 bucks so hopefully this $30 dollar combo can stick it the the HDCP creators that spent fortunes to try make my equipment obsolete CRT Forever ********!!!!!
Last edited by mx83toy on Tue Aug 13, 2013 9:50 pm; edited 1 time in total
|
|
Back to top |
|
|
gnnash
Joined: 10 Jul 2013 Posts: 216 Location: Lake Elmo, MN
|
Link Posted: Mon Aug 12, 2013 12:52 pm Post subject: |
|
|
Did the splitter end up working? I just purchased a Faroudja NRS-DVI that I'd like to use with HDCP sources...
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Mon Aug 12, 2013 11:01 pm Post subject: |
|
|
Fingures crossed I think it arrives today...as soon as I find out I'll be posting so stay tuned... On a side note my amp has a faroudja processor in there
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Mon Aug 12, 2013 11:18 pm Post subject: |
|
|
My suspicions of it being here are correct now the torture of staring at the clock for 8 hours till I get out of work to go test
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Mon Aug 12, 2013 11:57 pm Post subject: some pics |
|
|
Some pics...
Description: |
Clothes off ... dirty dirty splitter!!! |
|
Filesize: |
67.85 KB |
Viewed: |
24046 Time(s) |
|
Description: |
|
Filesize: |
50.09 KB |
Viewed: |
24046 Time(s) |
|
Description: |
|
Filesize: |
48.71 KB |
Viewed: |
24046 Time(s) |
|
Description: |
|
Filesize: |
61.86 KB |
Viewed: |
24046 Time(s) |
|
|
|
Back to top |
|
|
the big E
Joined: 20 Apr 2013 Posts: 1928 Location: speedwell Tn.
|
Link Posted: Tue Aug 13, 2013 4:07 am Post subject: |
|
|
Cool
_________________ crt king of black
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Tue Aug 13, 2013 2:09 pm Post subject: |
|
|
Splitter freakn worked it stripped that hdee see pea sh*t outta there!!! The hdmi to 5 bnc adapter didn't do well for me but may work for others... I now run ps3 to splitter to my amp all via hdmi then the amp that has on board faroudja processor converts to component sending it out at 1080i working a treat!!! No more bluray at 480
|
|
Back to top |
|
|
ecrabb Forum Moderator
Joined: 13 Mar 2006 Posts: 15909 Location: Utah
TV/Projector: JVC RS40, Epson 5010
|
Link Posted: Tue Aug 13, 2013 2:39 pm Post subject: |
|
|
Thanks for posting. I may have to grab one of these to put in my completely-HDMI-compliant chain to see if it solves my issue.
My only concern is given the price and source, what else is it doing to the signal?
SC
|
|
Back to top |
|
|
gnnash
Joined: 10 Jul 2013 Posts: 216 Location: Lake Elmo, MN
|
Link Posted: Tue Aug 13, 2013 2:48 pm Post subject: |
|
|
My guess is at that price, and given the fact that things are digital, it's doing absolutely nothing to the actual display and audio data, other than decrypting it and removing the HDCP protection.
Given the complexity of HDCP handshaking with two displays and one source, the manufacturer likely elected to just decode the HDCP-encrypted data, then transmit it to both outputs. Since this is all a digital bitstream, the picture and audio should be completely unaffected.
|
|
Back to top |
|
|
fragzero
Joined: 30 Aug 2012 Posts: 344
|
Link Posted: Tue Aug 13, 2013 2:51 pm Post subject: |
|
|
Where did you get it? After your results i'm interrested in getting one as well!
|
|
Back to top |
|
|
stridsvognen Guest
|
Link Posted: Tue Aug 13, 2013 4:06 pm Post subject: |
|
|
Hey we all want 2... Link...????
It will make a hole lot of DVDO VP50 and others very usefull for CRT..
|
|
Back to top |
|
|
gnnash
Joined: 10 Jul 2013 Posts: 216 Location: Lake Elmo, MN
|
|
Back to top |
|
|
gnnash
Joined: 10 Jul 2013 Posts: 216 Location: Lake Elmo, MN
|
Link Posted: Tue Aug 13, 2013 4:21 pm Post subject: |
|
|
Oh, wait... some later reviews say the latest models do not strip HDCP... good thing I didn't quite pull the trigger yet, we'll have to wait for the OP.
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Tue Aug 13, 2013 5:10 pm Post subject: |
|
|
Ohh and the one I picked is so generic it ain't even branded that was another resin I picked it
|
|
Back to top |
|
|
gnnash
Joined: 10 Jul 2013 Posts: 216 Location: Lake Elmo, MN
|
Link Posted: Tue Aug 13, 2013 5:15 pm Post subject: |
|
|
Link doesn't work from here.
I actually ended up getting the Amazon one, someone posted a review in July stating it stripped HDCP, after the person (in april) said it didn't. In another August review, someone said that it "lets them use their Blu-Ray player with their old TV" when nothing else would work for them.
So I took a gamble as well. We'll see how they work!
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Tue Aug 13, 2013 5:24 pm Post subject: |
|
|
Hope it works for u ... I might change the title now
|
|
Back to top |
|
|
gnnash
Joined: 10 Jul 2013 Posts: 216 Location: Lake Elmo, MN
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24296 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Tue Aug 13, 2013 10:15 pm Post subject: |
|
|
A $25 stripper? How many kids has she had, and how old is she?
(Sorry, couldn't help myself!)
|
|
Back to top |
|
|
mx83toy
Joined: 14 Dec 2012 Posts: 322
|
Link Posted: Tue Aug 13, 2013 11:13 pm Post subject: |
|
|
|
|
Back to top |
|
|
|
|