View previous topic :: View next topic |
Author |
Message |
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Thu Apr 11, 2013 5:54 am Post subject: Help with Draper screen selection for G90 |
|
|
Local guy is doing a G90 with a Draper screen, electric,Tab-Tensioned, 4:3.
http://www.draperinc.com/ProjectionScreens/surfaceSelectorResults.asp
The "Pure White XT1300V" is their 1.3 gain material
Would the "Pearl White CH1900V" 1.9 gain hot spot with the G90? I understand it has a narrow viewing angle but that's not a problem in this instance.
His main use is Disney DVD's for his daughter.
Which would you guys recommend? The 1.3 or the 1.9 gain?
PLEASE no "DUDE YOU NEED A 16:9 SCREEN!" posts and absolutely none of that stupid 4:3 in a 16:9 window nonsense.
He want's a big picture not a retarded one.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Thu Apr 11, 2013 7:09 pm Post subject: |
|
|
Either one will be fine, but my preference is for the 1300. The 1900 will make the image brighter with more pop, but the 1300 will look better all around.
I know he's trying to decide on a width for the screen. If he goes wider than 96" than get the 1900. Smaller than 96 wide use the 1300.
I spoke with him yesterday and asked if you could help him hang the G90 so that you can determine the max width in his room. That's really to only way to know for sure once the keystone is set. Put the bottom two corners almost all the way to the edge of the tube; between about 3.5-6 mm from the edge.
Also, he wants to do 3D and I will say that the 3D will look better on the 1900.
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
Spanky Ham
Joined: 22 Mar 2006 Posts: 5643 Location: Comedy Central
|
Link Posted: Thu Apr 11, 2013 10:51 pm Post subject: |
|
|
How about this? DUDE, What is up with using a G90 for a kid?
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Thu Apr 11, 2013 11:34 pm Post subject: |
|
|
CIR Engineering wrote: | Either one will be fine, but my preference is for the 1300. The 1900 will make the image brighter with more pop, but the 1300 will look better all around.
I know he's trying to decide on a width for the screen. If he goes wider than 96" than get the 1900. Smaller than 96 wide use the 1300.
I spoke with him yesterday and asked if you could help him hang the G90 so that you can determine the max width in his room. That's really to only way to know for sure once the keystone is set. Put the bottom two corners almost all the way to the edge of the tube; between about 3.5-6 mm from the edge.
Also, he wants to do 3D and I will say that the 3D will look better on the 1900.
craigr |
Great thanks Craig. I'm thinking the 1900 may be the way to go for him because he wants to do 3D later. Plus if his new room is like his old room he doesn't have total light control.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Thu Apr 18, 2013 8:59 am Post subject: |
|
|
Draper has asked me what the lens ratio is on the G90. Anyone know off the top of their head?
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Thu Apr 18, 2013 1:19 pm Post subject: |
|
|
WTF? I don't know what they mean other than 16x9, 2.35, 4x3... Have you just given them the dimensions you want for the screen? Really just telling them the width and 4x3 should be all they need.
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Thu Apr 18, 2013 3:17 pm Post subject: |
|
|
CIR Engineering wrote: | WTF? I don't know what they mean other than 16x9, 2.35, 4x3... Have you just given them the dimensions you want for the screen? Really just telling them the width and 4x3 should be all they need.
craigr |
I haven't been over there yet and he's had some delays. He thinks he's got 120" from lenses to screen but until I see it and we measure it we won't know for sure the width.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
jask
Joined: 17 Mar 2006 Posts: 10165 Location: kamloops BC
|
Link Posted: Wed Apr 24, 2013 5:55 am Post subject: |
|
|
I have a 1300 and think it is great for regular viewing, it would make sense to set up with a 1900 and have the settings dialed back for non 3D sources. How is the seating relative to the viewing angle if you go high gain? will any seats lose out on image quality? let us know what happens.
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Wed Apr 24, 2013 8:01 am Post subject: |
|
|
jask wrote: | I have a 1300 and think it is great for regular viewing, it would make sense to set up with a 1900 and have the settings dialed back for non 3D sources. How is the seating relative to the viewing angle if you go high gain? will any seats lose out on image quality? let us know what happens. |
Should be out there this weekend (tentatively) . I'll let you know what he goes with.
_________________ Tech support for nothing
CRT.
HD done right!
|
|
Back to top |
|
|
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26690 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
Link Posted: Fri Aug 02, 2013 5:01 am Post subject: |
|
|
SO. He went with the Draper 1300. They sent it with the motor on the wrong side, they refused to pay return shipping. They wanted him to pay for their mistake. Long story short it's trashed.
He's buying another screen. He also said the 1300 had less gain than his cheapie eBay screen. All in all a very unhappy experience with Draper.
_________________ Tech support for nothing
CRT.
HD done right!
Last edited by AnalogRocks on Sat Aug 03, 2013 4:29 am; edited 1 time in total
|
|
Back to top |
|
|
jbmeyer13
Joined: 03 Dec 2010 Posts: 1135
|
Link Posted: Fri Aug 02, 2013 5:36 pm Post subject: |
|
|
Never heard anything good about Draper; its always been Stewart or Da-Lite that I've heard the best with regards to the larger manufacturers. I understand from CIR that Stewart is the only company that actually has accurate/tested specs for gain. I suppose the question isn't whether there are other excellent screens (which there are) but it's trying to figure out which one to get. With no formal standards/certification it's tough to figure out what you'll receive with screen materials.
_________________ Projector: Modded 9501LC ULtra- MP VIM, Vold VNB, ETECH LVPS, Silver VIM Cables, HD10F's & a V1 case!
|
|
Back to top |
|
|
|
|