Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

RF Emitter and DLP Link Projector

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> 3D Products
View previous topic :: View next topic  
Author Message
bencrossman




Joined: 16 Nov 2012
Posts: 3



PostLink    Posted: Fri Nov 16, 2012 6:30 am    Post subject: RF Emitter and DLP Link Projector Reply with quote


        Register to remove this ad. It's free!
I am doing a weird experiment (dont ask Smile


I have a VGA DLP Link projector that I want to use RF glasses with and it does not have a sync out plug.
I have hooked the vsync and ground of the vga cable to a Din-3 plug and plugged that into my emitter, similar to this page:
http://www.stereo3d.com/vesa3.htm
The emitter seems to pick up this signal.
I then start playing with the delay/timings on the emitter but can not seem to get the right settings to get all colors working and the seperate images in each eye,

Does anyone know if this is even possible?
Does anyone have any advice on what timings I should use?

Thanks
Ben
Back to top
Rolls-Royce




Joined: 30 Sep 2007
Posts: 288
Location: Victorville, CA


PostLink    Posted: Sat Nov 17, 2012 6:35 pm    Post subject: Reply with quote

This may be due to the difference in porch widths and other timing between analog (VGA) and digital signals. I've only used an RF glasses emitter with the 3D Theater, which works with HDMI (digital) inputs and outputs only.
_________________
....Royce....
Back to top
bencrossman




Joined: 16 Nov 2012
Posts: 3



PostLink    Posted: Tue Nov 27, 2012 5:21 am    Post subject: Reply with quote

Where I do the sync extraction is after the digitial to analog conversion so it cant be that.
I have a VGA signal that my DLP projector uses and the vsync is taken from that but I cant get the emitter timings to match the projector.
Back to top
bencrossman




Joined: 16 Nov 2012
Posts: 3



PostLink    Posted: Thu Dec 06, 2012 1:25 am    Post subject: Reply with quote

Solved anyway, just had to play with the timings a little more.
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> 3D Products All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum