CurtPalme.com Home Theater Forum

Tim in Phoenix · Joined: 21 Oct 2006 Posts: 2252 Location: Phoenix

Guys

I am checking prices for stainless fillhole screws, bellows screws, and scheimpflug bolts, to maybe offer in two or three kits, available by mail. There are a) 6 fillholes screws per LC Marquee, b) 54 bellows screws, and c) 12 scheimplug bolts. Hardware stores charge way too much for these out of little bins.

I was thinking an "a" kit, and also an "ab" kit, and an "abc" kit at various prices. The latter two would be a bit much for envelopes so may resort to small Flat Rate Priority boxes.

I'll revisit this when I have the prices and postage levels organized. The "a" kit should fit any envelope, the others probably need boxes.

Anybody think they might be interested? I have to buy the screws in boxes of 50 or 100 to get the best deal.

.

dturco · Posted: Wed Jun 13, 2012 11:51 pm Post subject:

interested

CIR Engineering · Posted: Thu Jun 14, 2012 12:24 am Post subject:

+1

jbmeyer13 · Joined: 03 Dec 2010 Posts: 361

Nashou66 · Posted: Thu Jun 14, 2012 1:18 am Post subject:

Maybe Kal can add a link to your for sale page (if he makes one for you) on my bellows page. It be a nice combo for those who are replacing their old bellows.

Nashou

Tim in Phoenix · Joined: 21 Oct 2006 Posts: 2252 Location: Phoenix

Say Nash

Let's see what the demand looks like, this is more of a service than a profit center Smile

We can save the guys some gasoline and rubber I bet.

.

barclay66 · Posted: Thu Jun 14, 2012 7:19 am Post subject:

Hi,

I would have been interested too if I hadn't already spent over $200 on the bolts, screws & washers You can see in the picture below. And that was a set for two tubes only!
I have to add that there are two factors contributing to this expensive upgrade:

- In order to acheive the same mechanical properties I chose bolts made of an alloy named "A2-80". It has a higher rigidity and withstands more mechanical stress than regular stainless steel alloys.

- In Germany moving away from metric pieces is "punished" with exaggerated pricing.

Regards,
barclay66

dvh99 · Joined: 25 Dec 2009 Posts: 1955 Location: nederland

ahhh, deutsche gründlichkeit just like the play yesterday Evil or Very Mad

.

barclay66 · Posted: Thu Jun 14, 2012 10:31 am Post subject:

Tim in Phoenix · Joined: 21 Oct 2006 Posts: 2252 Location: Phoenix

Guys

I have the stainless steel fillhole screws on hand, envelopes are en route. $2.00 for six; $3.00 for twelve. Add a dollar for Canada and offshore. Do advise if you want any of the other tube fasteners in stainless.

ehometech@earthlink.net for Paypal.

.

dturco · Posted: Mon Jun 18, 2012 9:48 pm Post subject:

Are you going to get the Bellow screws too?

Tim in Phoenix · Joined: 21 Oct 2006 Posts: 2252 Location: Phoenix

ronaldus · Joined: 25 Dec 2010 Posts: 105 Location: france

Hi Tim,

You still have those fill hole screws?

If I send you the money by paypal +1 dollar for France Is that Ok?

I'll give you my adress by PM?

Regards,

Ron.

Tim in Phoenix · Joined: 21 Oct 2006 Posts: 2252 Location: Phoenix

Guys

Postage was rather more than I expected, so US is $4 for six fillhole screws, $6 for twelve, add $1 for Europe Asia etc.

.

Tim in Phoenix · Joined: 21 Oct 2006 Posts: 2252 Location: Phoenix

Guys

Good thing I didn't load up on stainless fasteners; in three weeks I had two orders for fillhole screws, period.

.

CIR Engineering · Posted: Mon Jul 30, 2012 5:38 pm Post subject:

Tim,

I am going to send you a client today to get some.

craigr

Dr. Evil · Joined: 28 Oct 2006 Posts: 22 Location: London, England

Put me down for an 'ab' kit please if you are still offering this service, PM on the way.