CurtPalme.com Home Theater Forum

00antstaines · Joined: 29 May 2012 Posts: 1

Hi, i have the VIP 3D displayer connected to a 60hz LCD TV that works great at night, but it is unusable during the day because of the flickering of my room, from what i understand at 60hz it is flickering in time with the screen L-R-L-R-L-R, wouldn't it eliminate the flicker if the glasses were running at 120hz and doing L-L-R-R-L-L-R-R, which would still be in sync with the display?

and one more thing, i'm one of the unlucky ones that get a frame locking issue, according to my tv manual at 1280x720 my tv doesn't run exactly 60hz it's actually 59.855hz the only resolution to get 60hz exactly is the native 1920x1080, is it a hardware limitation that wont allow this resolution or will the 3D VIP be able to support it in a future firmware update?

Thanks (Samsung LE32B550)

**kal** · Posted: Tue May 29, 2012 9:05 pm Post subject:

Hi!

Your questions are more about the inner hardware workings of the 3D-Displayer and possible future updates. I'm afraid those are things that we don't know much about (especially what future updates may or may not be released). Only the manufacturer would be aware of these. You may want to try sending them a note. They're at 3d-vip.com. They usually don't monitor this forum so you'll most likely get a faster response if you contact them directly.

Kal