CurtPalme.com Home Theater Forum

jeffslife · Posted: Mon May 14, 2012 6:36 pm Post subject:

Yeah I'm fine, Thanks for asking. I am going to try that and then I'll post back.

jeffslife · Posted: Mon May 14, 2012 7:06 pm Post subject:

It worked. I have a good image. The VP and BD are set up under the PJ so no sound, I will try to work the Denon into the chain next.
Anything I should do to it first ?

Nashou66 · Posted: Mon May 14, 2012 7:10 pm Post subject:

Id keep the denon out of the video chain, just use it for audio and the Lumagen for video.

Nashou

jeffslife · Posted: Mon May 14, 2012 7:14 pm Post subject:

I was using the Denon as a switcher.

CIR Engineering · Posted: Mon May 14, 2012 7:24 pm Post subject:

jeffslife · Posted: Mon May 14, 2012 7:30 pm Post subject:

HDMI -HDMI
22 awg/10c+24awg/5c 80 degree C 30 V vw-1 high speed hdmi
30 foot

CIR Engineering · Posted: Mon May 14, 2012 7:39 pm Post subject:

jeffslife · Posted: Mon May 14, 2012 7:43 pm Post subject:

I think so, It was the best one monoprice had about a year ago. I will see if I can check the part #.
Putting the denon in and it went right back to noise. No image at all.

CIR Engineering · Posted: Mon May 14, 2012 7:57 pm Post subject:

Oppo HDMI 1 > Lumagen > Projector

Oppo HDMI 2 > Denon

That should be the same thing. Did it go back to noise because of the Denon or the long cable?

craigr

jeffslife · Posted: Mon May 14, 2012 8:11 pm Post subject:

Just got off the monoprice site, cable was not silver plated copper, I am going down to test now.

jeffslife · Posted: Mon May 14, 2012 8:17 pm Post subject:

I have an image (not going through the Denon) but the PQ is slightly less than when it was on just a 6 foot cable.
Is there a setting on the denon I can change or is it just problamatic ?

CIR Engineering · Posted: Mon May 14, 2012 8:20 pm Post subject:

Let me mess with it when I get there.

Did you order/get the HDMI extender?

craigr

jeffslife · Posted: Mon May 14, 2012 8:22 pm Post subject:

not yet, going to today. Also want to get a new cable too. silver plated copper ?

jeffslife · Posted: Mon May 14, 2012 8:24 pm Post subject:

I better check, I am not sure if I ordered the repeater and it was backordered or not. I have some other things on backorder too.
In any case it will be here before you are.

Nashou66 · Posted: Mon May 14, 2012 8:28 pm Post subject:

Blue Jeans makes a nice HDMI cable as well. For long runs use a good a cable as you can afford.

Still wish you'd slap that G90 up there!! Very Happy

Nashou

jeffslife · Posted: Mon May 14, 2012 8:37 pm Post subject:

I am going to hang the G90 in the second week of june if all goes to plan, I took too much flack for not trying it first.
Craig says he can make it go with a movable screen. I am going to hang it right where the G70 is and then make the screen temporarily mobile. It took a little but the support staff here talked me off the ledge. So by July I should be enjoying the G90.
I almost cant bear to take the G70 down,Craig made it look so good. I am going to hang it on the other side of the basement where the kids game room is.(That way I can still visit it.)

jeffslife · Posted: Mon May 14, 2012 8:48 pm Post subject:

I was checking the Denon and it doesnt appear to support 1080 P 24
The closest was 1080 P 30
So should I order a DVI - HDMI cable or just get a HDMI-HDMI
Also it would appear that I will also need a switcher along with the extender,I will see if I can find an ALL IN ONE unit.

CIR Engineering · Posted: Mon May 14, 2012 9:26 pm Post subject:

jeffslife · Posted: Mon May 14, 2012 9:34 pm Post subject:

I thought you said something to that point so I went back and re read the thread. I get it now. I will check my order status on monoprice and get everything ordered. THANKS !

jeffslife · Posted: Mon May 14, 2012 10:19 pm Post subject:

Craig, will this cable work ? It says in the description 1080I it doesnt mention 1080P.
Also the extender does not have a power supply and monoprice does not carry one for it.
http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10240&cs_id=1024002&p_id=3571&seq=1&format=2
They have some REDMERE cables that are high speed,Directional the way I understand it.
I could get that one if you prefer