| View previous topic :: View next topic |
| Author |
Message |
Tim in Phoenix
Joined: 21 Oct 2006
Posts: 2248
Location: Phoenix
|
 Link Posted: Wed Apr 25, 2012 7:27 pm Post subject: Sleek Vidikron Vision lid cheeper! REDUCED!!! |
 |
|
Guys
A curvaceous Pinanfarina lid fits eight inch Marquees, fits nine inch with some modifications; flat black, needs touchup, or paint any color you like. Pictures sent to your e.mail on request.
Make offer.
Tim at E-Tech
ehometech @ earthlink.net
.
| Description: |
|
| Filesize: |
108.32 KB |
| Viewed: |
631 Time(s) |
|
Last edited by Tim in Phoenix on Sat May 12, 2012 5:35 pm; edited 1 time in total
|
|
| Back to top |
|
 |
Tim in Phoenix
Joined: 21 Oct 2006
Posts: 2248
Location: Phoenix
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1468
Location: Fond du Lac, WI
|
| Link Posted: Sat May 12, 2012 5:41 pm Post subject: |
|
|
That is sexy 
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
jbmeyer13
Joined: 03 Dec 2010
Posts: 360
|
| Link Posted: Mon May 14, 2012 2:52 pm Post subject: |
|
|
Hey Tim,
How would someone mod that to fit a 9" machine? I ask because fiberglass has the tendency to shatter relatively easily.
_________________
Projector: 9500LC- Dragan's HD Mods, ETECH PS Mods, Moome 1.3, HD10F's & a V1 case!
|
|
| Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006
Posts: 2248
Location: Phoenix
|
| Link Posted: Mon May 14, 2012 3:01 pm Post subject: |
|
|
| jbmeyer13 wrote: | Hey Tim,
How would someone mod that to fit a 9" machine? I ask because fiberglass has the tendency to shatter relatively easily. |
The lens openings would need to be cut bigger like a big oval, since nine inch lenses are slightly higher off the deck and slightly farther apart.
.
|
|
| Back to top |
|
|
jbmeyer13
Joined: 03 Dec 2010
Posts: 360
|
| Link Posted: Mon May 14, 2012 3:32 pm Post subject: |
|
|
What I meant, was how do you cut (what tools) so that you don't destroy the thing?
_________________
Projector: 9500LC- Dragan's HD Mods, ETECH PS Mods, Moome 1.3, HD10F's & a V1 case!
|
|
| Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006
Posts: 2248
Location: Phoenix
|
| Link Posted: Mon May 14, 2012 5:45 pm Post subject: |
|
|
I have not modified one, a Corvette shop could handle it.
.
|
|
| Back to top |
|
|
J Kildare
Joined: 28 Sep 2006
Posts: 164
|
| Link Posted: Mon May 14, 2012 7:38 pm Post subject: |
|
|
|
I used a unibit ( a 7/8 tapered drill bit ). I drilled a couple of holes and then used a saber saw with a fine blade, it's tricky unless you can find a long blade as I had to cut some from the front and some from the back. The length of the blade prevents you from cutting it all from one side. I made mine a vision one from a vision two. It was a lot of work as the holes are somewhat oval and no way I could think of to measure off anything. It turned out great but like I said, a lot of work. Next time I would cut out a neat oval and get some plastic car door trim for the rough cut.
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
