CurtPalme.com Home Theater Forum

**Curt Palme**

Check this out!

Nashou66 · Posted: Mon Feb 06, 2012 7:52 pm Post subject:

Hmm , they must have started over with a new software version for the 9572 or it was a special custom OEM spec from a customer.

What does the chip say on the CLM?

Athanasios

Nashou66 · Posted: Mon Feb 06, 2012 7:55 pm Post subject:

I have the Contrast modulation, and the Horizontal keystone I think but the the Green left, what ever that is.The Zone skew is kinda cool but probably only needed for a dome set up I bet.

Athanasios

HK-Steve · Posted: Mon Feb 06, 2012 8:39 pm Post subject:

Why does Curt have a date with Anna,

opps sorry, reading the wrong text !!!!!!!!!!!

Seems like some zone control, but, would be pretty funky to play with. then zero it after the picture gets all screwed up.

**Curt Palme** · Posted: Mon Feb 06, 2012 8:43 pm Post subject:

Cause Anna loves me! Smile

This is out of a simulator 9500. Complete thick metal enclosure of the focus board they sent in as well. additional shielding on the CKM as well. Strange problems with this CLM- intermittent loss of the H direction of geometry. Power down, power up, and the H convergence and geometry is lost. Off and on again, and it comes back. Go figure. Cleaned all socketed chips and module connections, it hasn't done it since.

HK-Steve · Posted: Mon Feb 06, 2012 9:00 pm Post subject:

Opps,
Did you just say that out loud!!!!!!!!!! Anna loves me, ANNA LOVES ME, Yes you did..........

Strange with the CLM, normally contact problem, but is not pointing that direction.

Cheers