| View previous topic :: View next topic |
| Author |
Message |
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
 Link Posted: Sat Nov 12, 2011 3:45 pm Post subject: FOR SALE - NEC 9PG PROJECTOR PARTS - MAKE ME AN OFFER!! |
 |
|
MAKE ME AN OFFER!!! 
I have an NEC 9PG Plain projector that was working about a year ago, I made a trip to Taco Hell to get some food and when I came back my projector was off.
Tubes are fine, Ill be posting pics shortly. (I have pictures, just got to get them up, Id rate the G and B tubes a 5-6, the red a 8+, visually I cannot see any wear)
Some of the other stuff:
Tubes: $65 for the set (magnetics not included) (HV wires included)
NEC 9PG Setup Remote $50 Shipped Works great
Magnetics/yolks: $45 for the set
Neck Boards: $20 SHIPPED
Focus Board: $25
System Board Wave board 72137181 (SOLD)
System Board 72137171 (SOLD)
Video Out boards (SOLD)
100 point convergence Board $30
NEC 9PG Complete Plastics Set, Cover, hinges, Lens Cover, and all lower plastic Panels {b]$20[/b]
NEC 9PG Chassis - Free to anyone who is either willing to pay for shipping or pick it up. It will be recycled after the part out is complete.
Any other board not mentioned ]b]MAKE AN OFFER!!![/b]
Power SupplyPARTED OUT
Deflection Board (SOLD)
H/V Block: $20
MAKE ME AN OFFER ON ANY OF THE PARTS - I AM WILLING TO ACCEPT ANY OFFER THAT INST CRAZY - I JUST WANT THE PROJECTOR GONE
Also Available - Complete Colour Corrected Set of HD6-CL Lenses in excellent condition - Please See other listing here 
I know theres parts I have not listed because I can't think of their names off the top of my head, but if you need something not listed shoot me a PM.
Shippinng will be calculated at time of Sale.
[/b]
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
Last edited by Jeremy112 on Thu May 24, 2012 6:47 pm; edited 5 times in total
|
|
| Back to top |
|
 |
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Thu Nov 24, 2011 9:15 pm Post subject: |
|
|
Bump, all parts still available!
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
gjaky
Joined: 05 Jun 2010
Posts: 922
Location: Budapest, Hungary
|
| Link Posted: Fri Nov 25, 2011 7:36 am Post subject: |
|
|
The good things are always far from me 
_________________
NEC 6PG xtra
|
|
| Back to top |
|
|
RayN999
Joined: 25 May 2010
Posts: 165
Location: Minneapolis, MN
TV/Projector: Runco VX-1C with VHD and Toshiba 65H84 CRT RPTV
|
| Link Posted: Sat Nov 26, 2011 12:33 am Post subject: |
|
|
I'd take it but we all know how THAT would turn out....
Ray
_________________
Ray Nelson
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Sun Nov 27, 2011 3:44 pm Post subject: |
|
|
| gjaky wrote: | | The good things are always far from me |
lol, thats how I feel when I see a good G90 or Barco 909 thats for sale in some state across the country
But if you are interested gjaky I would be willing to ship the parts to you (for additional shipping costs) if you wanted anything. I REALLY don't want to throw the projector away, it deserves much better than that.
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
gjaky
Joined: 05 Jun 2010
Posts: 922
Location: Budapest, Hungary
|
| Link Posted: Sun Nov 27, 2011 4:14 pm Post subject: |
|
|
Thanks, but the shipping of a single board would around 50$ then its not funny. But if it would in my neighborhood, then I'd buy the whole stuff without thinking
_________________
NEC 6PG xtra
|
|
| Back to top |
|
|
kschmit2
Joined: 09 Mar 2006
Posts: 1141
Location: Heidelberg, Germany
|
| Link Posted: Sun Nov 27, 2011 6:42 pm Post subject: |
|
|
| gjaky wrote: | | Thanks, but the shipping of a single board would around 50$ then its not funny. But if it would in my neighborhood, then I'd buy the whole stuff without thinking |
which parts do you need?
|
|
| Back to top |
|
|
gjaky
Joined: 05 Jun 2010
Posts: 922
Location: Budapest, Hungary
|
| Link Posted: Sun Nov 27, 2011 6:46 pm Post subject: |
|
|
At the moment fortunately nothing But keeping a little backup always a good idea
_________________
NEC 6PG xtra
|
|
| Back to top |
|
|
horex
Joined: 30 Nov 2011
Posts: 2
|
| Link Posted: Wed Nov 30, 2011 1:22 pm Post subject: I need help |
|
|
Hello,
i need a wave board ( PWC-3719 wave PWB 72137192 ) for a NEC PG 6
Can you help me ? 
greeting from germany 
|
|
| Back to top |
|
|
kschmit2
Joined: 09 Mar 2006
Posts: 1141
Location: Heidelberg, Germany
|
| Link Posted: Wed Nov 30, 2011 8:10 pm Post subject: |
|
|
horex, I have 2 WAVE PWBs here, and I'm located in Germany, so shipping costs will be marginal. Both are from 100 percent working PJs, that were test-run for 100 hours prior to disassembly. Both PJs had pretty low hours (1000-1500) and no problems.
#1: this was a GE Imager machine in an all-black case (PG9000)
PWC-3719 72137192 inkstamp: 1E7-243AJ
#2: this was a regular NEC PG9000
PWC-3719 72137191 inkstamp: 1E7-132B
Make me a reasonable offer (use PM)
I still have plenty of other parts (incl Point board...) and some tubes too
Of course Jeremy gets a first shot, but I think shipping kills any possible deal. I haven't been able to sell much overseas lately due to shipping costs
Kai
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Thu Dec 01, 2011 6:29 am Post subject: |
|
|
Kai,
I will let you work something out with horex, though willing to ship to Germany, as Kai said, shipping would kill it. Too bad I didn't live overseas, thats where the interest is! 
Thanks for your interest though horex!
All parts are still available to anyone interested!
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
horex
Joined: 30 Nov 2011
Posts: 2
|
| Link Posted: Thu Dec 01, 2011 11:06 am Post subject: |
|
|
| kschmit2 wrote: | horex, I have 2 WAVE PWBs here, and I'm located in Germany, so shipping costs will be marginal. Both are from 100 percent working PJs, that were test-run for 100 hours prior to disassembly. Both PJs had pretty low hours (1000-1500) and no problems.
#1: this was a GE Imager machine in an all-black case (PG9000)
PWC-3719 72137192 inkstamp: 1E7-243AJ
#2: this was a regular NEC PG9000
PWC-3719 72137191 inkstamp: 1E7-132B
Make me a reasonable offer (use PM)
I still have plenty of other parts (incl Point board...) and some tubes too
Of course Jeremy gets a first shot, but I think shipping kills any possible deal. I haven't been able to sell much overseas lately due to shipping costs
Kai |
Hallo Kai,
sorry mein Englisch ist nicht so doll 
Pm geht leider nicht ( noch keine 5 Post )
Habe Interesse und wäre prima wenn Du mich unter Mail : olefretchen@gmx.de, kontaktieren könntest 
Gruß
Herbert
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Sat Mar 10, 2012 6:25 pm Post subject: |
|
|
BUMP - Most parts still available - Pending sale on system board
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Sun Mar 11, 2012 1:33 am Post subject: |
|
|
System board Sold
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Sun Mar 18, 2012 9:23 pm Post subject: |
|
|
Bump - Deflection board Sold
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Thu Apr 05, 2012 3:58 pm Post subject: |
|
|
Bump - Wave Board and All Video signal/input boards sold
Added - Setup Remote & HD6-CL Lens Set, See original post
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Thu May 24, 2012 6:48 pm Post subject: |
|
|
bump - Accepting offers on any parts - I want this thing out of my spare room asap!!
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
janzy
Joined: 11 Sep 2006
Posts: 101
Location: Boston, Ma
|
| Link Posted: Mon Jun 18, 2012 1:58 pm Post subject: |
|
|
is the set up remote still available?
Thanks
|
|
| Back to top |
|
|
Jeremy112
Joined: 28 Sep 2006
Posts: 1442
Location: Fond du Lac, WI
|
| Link Posted: Tue Jun 19, 2012 1:02 pm Post subject: |
|
|
ok, who is willing to pay shipping for all parts except the chassis??? Anyone, Anyone,... Anyone?? 
_________________
If it ain't broke, and you try fixing it without success, don't come crying to me!
|
|
| Back to top |
|
|
crtsrcool
Joined: 05 May 2012
Posts: 20
|
| Link Posted: Wed Jun 20, 2012 2:03 am Post subject: |
|
|
|
Hi! I have a 9PG Plus that gives an F8 error on startup. Would your 100 point convergence board fix that if I replaced it into mine? If so then I'm definitely interested! thanks!
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
