Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

rtc2200+hdfuryII

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Crescendo-Systems Products
View previous topic :: View next topic  
Author Message
morlex13



Joined: 28 Apr 2008
Posts: 28



PostLink    Posted: Tue Aug 26, 2008 6:48 am    Post subject: rtc2200+hdfuryII Reply with quote


        Register to remove this ad. It's free!
hi
i would like to buy rtc2200
but,berfore y want to knoy if
rtc2200 work fine whit the future hdfury2??


thank you
Back to top
kal
Forum Administrator


Joined: 06 Mar 2006
Posts: 15277
Location: Ottawa, Canada

TV/Projector: JVC DLA-RS56


PostLink    Posted: Tue Aug 26, 2008 1:27 pm    Post subject: Reply with quote

Yes, it will work just fine. I'm assuming you'll want to plug the HDfury2 right into the RTC2200 to feed it an RGB signal. RGB is RGB, so it'll work just fine.

You can then use the RTC2200 to add a gamma boost, switch between component and RGB inputs, and host of other extras.

Kal

_________________

Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
Back to top
View user's photo album (18 photos)
morlex13



Joined: 28 Apr 2008
Posts: 28



PostLink    Posted: Wed Aug 27, 2008 6:34 am    Post subject: Reply with quote

thanks

yes
i want to plug my pc by hdmi cable>hdfury2>rtc2200>barco port 3
is right?
Back to top
kal
Forum Administrator


Joined: 06 Mar 2006
Posts: 15277
Location: Ottawa, Canada

TV/Projector: JVC DLA-RS56


PostLink    Posted: Wed Aug 27, 2008 2:05 pm    Post subject: Reply with quote

That should work.

Kal

_________________

Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
Back to top
View user's photo album (18 photos)
fearn48



Joined: 07 May 2008
Posts: 26
Location: Reading, England


PostLink    Posted: Thu Sep 18, 2008 2:36 pm    Post subject: Reply with quote

Hi Kal,

Could you confirm that the RTC2200 will add gamer boost to the output, when fed with a 1080/72p signal from the HDfury2?

I realise the Component conversion will not handle this refresh rate (tops out at 60p), and the RGB "pass-through " goes further (1600x1200/75Hz). However that is a computer resolution and they sometimes don't resolve every interim step.

Thanks
Peter

_________________
If only you could see what I've seen with your eyes!
Back to top
kal
Forum Administrator


Joined: 06 Mar 2006
Posts: 15277
Location: Ottawa, Canada

TV/Projector: JVC DLA-RS56


PostLink    Posted: Thu Sep 18, 2008 5:32 pm    Post subject: Reply with quote

Hi Peter,

The HDfury2 does not support 1080p/72 output. It tops out at 1080p/60. There was a day or two when the specs said it could do 1080p/72 but that's still being testing thoroughly to make sure it can indeed do it, so for the time being that spec was removed from the order page (www.curtpalme.com/HDfury2.shtm) just to make sure there isn't any confusion.

Kim of Crescendo-Systems can chime in to confirm but it's my understanding that the RTC2200 will handle any and all resolution/refresh rate combos up to and including 1600x1200/75 through the RGB passthrough. Mine has certainly handled everything I throw at it.

Moot point if the HDfury2 doesn't do it however. Moome's EXT-FULLHD HDMI converter does handle 1080p/72 though. See: http://www.curtpalme.com/EXT-FULLHD.shtm

Kal

_________________

Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
Back to top
View user's photo album (18 photos)
beun



Joined: 28 Jun 2006
Posts: 676



PostLink    Posted: Thu Sep 18, 2008 7:42 pm    Post subject: Reply with quote

Peter,

As kal mentioned, the RTC2200 will indeed do 1080p/72 through the RGB input without any problem.

_________________
ESL-0.5 Full Range Electrostatic Loudspeakers | RTC2200 Component to VGA Converter with Gamma Boost
Back to top
Malakay



Joined: 16 Mar 2006
Posts: 49
Location: Germany


PostLink    Posted: Thu Jun 23, 2011 1:16 pm    Post subject: Reply with quote

beun wrote:
Peter,

As kal mentioned, the RTC2200 will indeed do 1080p/72 through the RGB input without any problem.


Sorry for reanimating this old thread, but i want to use the RTC2200 with 1080/72 and 75p. Is this possbile?

My chain will be:

BluRay/HD-DvD/DvD/Pal TV to Lumagen Radiance +(72/75Hz) - Fury3 - RTC2200 - CRT


Thanks for you help!

Best regards
Chris
Back to top
beun



Joined: 28 Jun 2006
Posts: 676



PostLink    Posted: Thu Jun 23, 2011 9:48 pm    Post subject: Reply with quote

Chris,

When you go through the RGB input of the RTC2200 it will work. In case you are not interested in YPrPb transcoding function of the RTC2200 then the BUF2000 will be a cheaper option, it goes from RGB to RGB can generate almost any sync you want and it has the low level gamma function.


Kim

_________________
ESL-0.5 Full Range Electrostatic Loudspeakers | RTC2200 Component to VGA Converter with Gamma Boost
Back to top
Malakay



Joined: 16 Mar 2006
Posts: 49
Location: Germany


PostLink    Posted: Thu Jun 23, 2011 10:53 pm    Post subject: Reply with quote

I already bought the RTC2200 a few years ago from here. So im lucky with it in the past and im happy that i can use it also in the future.

Thanks for your answer.

gn8
Chris
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Crescendo-Systems Products All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum