CurtPalme.com Home Theater Forum

weldywire · Joined: 17 Apr 2009 Posts: 7 Location: casselberry,fl

Hello all, still learning on Crestron so please go easy on me if this is a stupid question. Im running into issues with the CH modules integration. I have used the 'help' on the module as well as viewing the CrestronHome Prog-User Guide.doc. Does anyone have a diagram or screen shot of the module routing? I wish to implement the 'priority control' module as well as integrate an 'override' button on my TP.

Sorry but Im having a hard time wrapping this around my brain.

Any help will be greatly appreciated.

weldywire · Joined: 17 Apr 2009 Posts: 7 Location: casselberry,fl

So i get that digital is blue,analog red and serial black. what is the green which input into the priority module?

**ecrabb** · Posted: Thu Mar 10, 2011 10:47 pm Post subject:

Try PM'ing users stefuel or jmayes - I think they're probably the two most knowledgable Crestron guys on this forum.

SC

weldywire · Joined: 17 Apr 2009 Posts: 7 Location: casselberry,fl

Thanks. Im familiar with Stefuel both here and on AVS,Ill give both a try. I was just dislike PMing out of the blue, making it a thread gives others the ability to search.

**ecrabb** · Posted: Fri Mar 11, 2011 2:03 am Post subject:

Sure, I agree... So, PM them and ask them to read and post in your thread. Wink

SC

stefuel · Posted: Sun Mar 13, 2011 8:43 pm Post subject:

I have not used the modules in question but I will look at this when I have more time.

weldywire · Joined: 17 Apr 2009 Posts: 7 Location: casselberry,fl

Thanks Stefuel,not an emergency so no pressure. Im still trying to lay everything out anyways.

I downloaded a .doc on the CH modules and although it adds a little more info its still not as in depth as I was hoping.Im toying around with them a little but still not 100%.

Thanks again for looking when you get a chance.

fuzzybee · Joined: 26 Sep 2006 Posts: 186

Green can be either analog or serial.