CurtPalme.com Home Theater Forum

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

Hi Guys,
The HD144's, RGBHV card, and Extender board are SOLD.
I gutted both projectors, and the ECP4500 guts have been SOLD

I have the ECP4100 parts left for sale. All 6 slide out boards (not including input boards), 3 neck boards, 3 power deflection modules, Bias (focus) module, motherboard, HV splitter, Power supply slide-out rack (LVPS, HVPS, etc).

I also have:
SD187 Tubes (not entirely sure I want to ship these...)
1 hard button and 1 soft button wired remote
1 input board (#800916) with the large round RGB connection, and 1 RGBHV connection.

SD187's:
http://i232.photobucket.com/albums/ee189/bugman74/ECP4500_6.jpg

ECP4100 Guts:
http://i232.photobucket.com/albums/ee189/bugman74/ECP4100_Parts.jpg

MrBlonde83 · Joined: 16 Mar 2009 Posts: 93 Location: Lansford, PA

I think I need that extender board. I can never reach the controls inside to properly adjust the height and width Razz

anybody claim those? or any of the power supplies? I don't have a spare for those.

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

Sold the extender board, HD144's, and one of the input boards. I still have everything else (including working power supplies from both sets).

MrBlonde83 · Joined: 16 Mar 2009 Posts: 93 Location: Lansford, PA

how much you want for both power supplies?

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

Did you want both complete slide out rack assemblies? (this includes the high voltage power supply, low voltage power supply, power entry module, standby power transformer, line filter, and the keystone module I think), or did you just want the HVPS?

I'm not really sure what they are worth anymore to tell you the truth. Make me a reasonable offer.

mc86 · Posted: Mon Mar 14, 2011 3:50 pm Post subject:

I'll PM you on many items from the 4500. Mine is Sept 97 as well.

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

See first post (edited) - Nearly all the ECP4500 stuff has been sold. Still have the SD187's, and the ECP4100 guts:

http://i232.photobucket.com/albums/ee189/bugman74/ECP4100_Parts.jpg

linux2 · Joined: 01 Oct 2010 Posts: 31

Hi,

I need the ECP 4100 power supply HVPS/LVPS. I really need the LVPS as mine doesn't seem to do 5v anymore. Let me know if you still have it and how much it would be. Shipping to 02052 or pickup if nearby. (within 300 miles is nearby for me)

Thanks!

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

Guys, Will a power supply (the HVPS/LVPS rack) from a 1990 ECP4100 (old case style with SD187 tubes) work in a 1994 ECP4100 with the 'new' case style and 07MS tubes? I seem to remember there are some extra wires required that go from the PS to the neckboards on an 07MS equipped ECP...

mc86 · Posted: Tue Apr 12, 2011 8:25 pm Post subject:

I can look-at/take-pics-of the LVPS/HVPS you sent me from your 4500, if that helps. The 3100 manual doesn't show any of the cabling details so I can't see if that will show anything. I quickly searched AVS archives and didn't see anything (am going to presume you searched here).
Matt

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

bugman74 · Joined: 28 Feb 2011 Posts: 11 Location: Tucson, AZ

Just a last update: Essentially everything is gone. I still have the SD187's. Cant bring myself to ship them or to toss them, so I guess I will store them for a little while.