Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

Sim2 C3x 1080 ??

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> 3D Products
View previous topic :: View next topic  
Author Message
JayJayHache




Joined: 11 Jan 2011
Posts: 3
Location: UK


PostLink    Posted: Tue Jan 11, 2011 8:45 pm    Post subject: Sim2 C3x 1080 ?? Reply with quote


        Register to remove this ad. It's free!
Can anybody tell me if this interface would likely work with a Sim2 C3x 1080 DLP projector?

Many thanks!
JayJayHache
Back to top
kal
Forum Administrator



Joined: 06 Mar 2006
Posts: 17850
Location: Ottawa, Canada

TV/Projector: JVC DLA-NZ7


PostLink    Posted: Fri Jan 14, 2011 2:14 am    Post subject: Reply with quote

The following two are the pre-requisites for 3D-Gamer to work with a projector:

1- Must be a DLP projector
2- Must support 120Hz

Given these two requirements are met, 3D-Gamer should work. Note, we do provide 30-day money back guarantee.

Kal

_________________

Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
Back to top
View user's photo album (18 photos)
JayJayHache




Joined: 11 Jan 2011
Posts: 3
Location: UK


PostLink    Posted: Sun Jan 16, 2011 2:53 pm    Post subject: Reply with quote

kal wrote:
2- Must support 120Hz


I've checked everything I can find online but i've had no luck confirming the max refresh rate of the Sim2 - Its a DLP unit for sure, and quite modern - but I think i'll need to do a test run (perhaps I can persuade windows to pump out 120 Hz so that I can run the test....)
Back to top
kal
Forum Administrator



Joined: 06 Mar 2006
Posts: 17850
Location: Ottawa, Canada

TV/Projector: JVC DLA-NZ7


PostLink    Posted: Sun Jan 16, 2011 6:40 pm    Post subject: Reply with quote

JayJayHache wrote:
kal wrote:
2- Must support 120Hz


I've checked everything I can find online but i've had no luck confirming the max refresh rate of the Sim2 - Its a DLP unit for sure, and quite modern - but I think i'll need to do a test run (perhaps I can persuade windows to pump out 120 Hz so that I can run the test....)

Sure, a 720p/120 (or 720p/100) test would work. We also over a 30-day no-nonsense money back guarantee so if it doesn't work out, simply send it back. Odds are (as you said) since it's a late model projector it will likely work.

Kal

_________________

Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
Back to top
View user's photo album (18 photos)
RSG




Joined: 03 Feb 2013
Posts: 2
Location: Philadephia


PostLink    Posted: Sun Feb 03, 2013 5:08 pm    Post subject: Reply with quote

Did you get the 3cx1080 projector to work
Back to top
Rolls-Royce




Joined: 30 Sep 2007
Posts: 288
Location: Victorville, CA


PostLink    Posted: Sun Feb 03, 2013 6:01 pm    Post subject: Reply with quote

You probably won't get an answer. The OP only made 3 posts, all about this subject, all around the same time, two years ago. As Kal said, they ha(d)ve a 30-day money-back guarantee. Give it a try!
_________________
....Royce....
Back to top
RSG




Joined: 03 Feb 2013
Posts: 2
Location: Philadephia


PostLink    Posted: Sun Feb 03, 2013 6:03 pm    Post subject: Reply with quote

I see that the plus unit has greater options for frequency choices. Would that insure that it works.
Back to top
Rolls-Royce




Joined: 30 Sep 2007
Posts: 288
Location: Victorville, CA


PostLink    Posted: Sun Feb 03, 2013 6:21 pm    Post subject: Reply with quote

I do't think it would ensure that the combo would work, but it would give you a better chance of working. To make sure, I would recommend you verify what type of signals the PJ will accept and then cross-match it with the list of output frequencies and resolutions the Theater Plus will produce. The frequencies the Plus outputs are discrete in that they are selected by dipswitches on the unit and are not frequency ranges. For instance, 60/120 on the unit are "60 OR 120 Hz", not "60 TO 120 Hz".
_________________
....Royce....
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> 3D Products All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum