| View previous topic :: View next topic |
| Author |
Message |
Bob_Collins
Joined: 30 Jun 2010
Posts: 9
|
 Link Posted: Thu Aug 19, 2010 4:23 pm Post subject: Panasonic TC-P42X24 Plasma |
 |
|
The set is an entry level set, but it should be able to be calibrated to look better than out of the box.
Attached is the report from ChromaPure using a Chroma 5 meter. The tracking and grayscale look good to me, but the gamma sure looks screwed up (and low), and the contrast ratio is lower after calibration than before. Any tips or suggestions on what to do to improve things would be greatly appreciated.
FYI, it only has COLOR & TINT for color adjustments.
My user settings are:
Picture Mode: Cinema
Contrast: 62
Brightness: 61
Color: 46
Tint: +19
Sharpness: 50
Color Temp: Warm
XV Color: Off
Video NR: Off
MPEG NR: Off
Black Level: Light
3:2 Pulldown: Auto
|
|
| Back to top |
|
 |
Tyler Pruitt
Joined: 25 Aug 2010
Posts: 1
Location: Seattle,WA
|
| Link Posted: Wed Aug 25, 2010 10:31 am Post subject: |
|
|
|
You adjusted the grayscale via the cuts and drives in the service menu correct?
|
|
| Back to top |
|
|
Bob_Collins
Joined: 30 Jun 2010
Posts: 9
|
| Link Posted: Thu Aug 26, 2010 12:02 am Post subject: |
|
|
| Tyler Pruitt wrote: | | You adjusted the grayscale via the cuts and drives in the service menu correct? |
Yes. I know of no other way to do it.
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
