| View previous topic :: View next topic |
| Author |
Message |
AnalogRocks
Moderator
Joined: 08 Mar 2006
Posts: 20966
Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
 Link Posted: Tue May 11, 2010 1:45 am Post subject: |
 |
|
Those are some horny speakers and so well plumbed too!
_________________
Tech support for nothing
CRT.
HD done right!
|
|
| Back to top |
|
 |
overclkr
Joined: 08 Mar 2006
Posts: 3465
|
| Link Posted: Tue May 11, 2010 1:50 am Post subject: |
|
|
| greg_mitch wrote: | 
Items remaining for the front three...
1. Paint main cabinet black (probably roll on a few glossy black coats with a foam roller)
2. Stain front baffle (was thinking dark stain but now seeing the light oak contrast with the black it looks pretty sharp, so I might just put a clear coat on top of this)
3. Install binding posts on top and back for each speaker and L-pad
4. Mount and wire up cross over
5. Test each speaker
6. Build stands to raise tweeter to ear level
7. Adjust horn vertical position to my liking
8. Enjoy!
Man...and I thought I was almost done! |
Greg, you are my hero. Those speakers are looking wicked awesome.
Cliff
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Wed May 12, 2010 4:12 am Post subject: |
|
|
And, yes...I have two snowblowers...don't ask. 
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Thu May 13, 2010 3:10 am Post subject: |
|
|
Got ports painted on the inside...second coat of black paint on cabinets (done)...darker coat of stain on front baffle.
I think it looks good with "Mission Oak" Polyshades by Minwax.
I think I can have at least the left and right playing some music this weekend. Still need to track down the short in my crossover for the third.
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
AnalogRocks
Moderator
Joined: 08 Mar 2006
Posts: 20966
Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
| Link Posted: Thu May 13, 2010 3:47 am Post subject: |
|
|
I thought you were going lighter with the stain on the front panels?
_________________
Tech support for nothing
CRT.
HD done right!
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Thu May 13, 2010 3:49 am Post subject: |
|
|
| AnalogRocks wrote: | | I thought you were going lighter with the stain on the front panels? |
Can't a guy get in the mood for a little bit darker wood?
Wait a minute...
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
AnalogRocks
Moderator
Joined: 08 Mar 2006
Posts: 20966
Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
| Link Posted: Thu May 13, 2010 4:02 am Post subject: |
|
|
| greg_mitch wrote: | | AnalogRocks wrote: | | I thought you were going lighter with the stain on the front panels? |
Can't a guy get in the mood for a little bit darker wood?
Wait a minute... |
I'm not touching that.
Knock on wood.........
_________________
Tech support for nothing
CRT.
HD done right!
|
|
| Back to top |
|
|
WanMan
Joined: 19 Mar 2006
Posts: 9668
|
| Link Posted: Thu May 13, 2010 5:21 am Post subject: |
|
|
| AnalogRocks wrote: | | greg_mitch wrote: | | AnalogRocks wrote: | | I thought you were going lighter with the stain on the front panels? |
Can't a guy get in the mood for a little bit darker wood?
Wait a minute... |
I'm not touching that.
Knock on wood......... |
That's what Michele said. 
_________________
Trust no one. Absolutely no one. Advice of the board.
|
|
| Back to top |
|
|
Tom.W
Joined: 09 Mar 2006
Posts: 6368
|
| Link Posted: Thu May 13, 2010 5:44 am Post subject: |
|
|
|
What drivers are you using on the horn high frequency end ?
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Thu May 13, 2010 1:11 pm Post subject: |
|
|
| Tom.W wrote: | | What drivers are you using on the horn high frequency end ? |
B&C DE250 Compression Driver
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Fri May 14, 2010 1:49 am Post subject: |
|
|
Here is the layout of the top of each cabinet.
Everything is all scuffed up and dusty while I work with the MDF and place and remove the top support over and over, etc. Will have to clean everything up in the end and probably spot patch a few nicks of paint.
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Sun May 16, 2010 2:16 am Post subject: |
|
|
Made a ton of progress today and finished up a pair! Only the one crossover to troubleshoot for the center channel and I am done with this build...my first!
Next to a pair of the Insignia's that have been sitting in as speaker duty while these were being built and my last set was already sold.
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Tue May 18, 2010 1:59 am Post subject: |
|
|
Finished the last one!
Now I am off to build a subwoofer!
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Sun May 23, 2010 12:06 am Post subject: |
|
|
Got the fabric from SeymourAV. Thanks a lot for your help Chris!
Trying to layout the screenwall before I get carried away buying wood and cutting. I need to verify for sure the final size of this screen.
Here is where I am at currently....
The soffit is really killing me!
Animation:
Here is how I plan to build the screen frame:
2x4 construction so I don't need any intermediate supports. Basically frame an opening...build a frame and staple a 2" overlap of fabric over the frame...then screw the frame into the opening [inserted from behind].
Make sense?
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
dturco
Joined: 06 Feb 2009
Posts: 3748
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Sun May 23, 2010 1:23 am Post subject: |
|
|
Looks well thought out.
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
ecrabb
Joined: 13 Mar 2006
Posts: 12488
Location: Iowa
TV/Projector: JVC RS45
|
| Link Posted: Sun May 23, 2010 2:47 pm Post subject: |
|
|
Greg, you're killin' me... You've had these things put together for at least a week or so, but you still haven't said how they SOUND!!! Please tell me you've spent half an hour listening to some stuff... I want at least a decent paragraph write-up on how they sound!!!
Nice work! I'm impressed!
Amazing what an impending baby will do to a light a fire under your ass to get some projects finished... I built my entire theater the spring before my second child was born! It was a case of "now or never. Well, more a case of "now or 2 years from now", I guess.
SC
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Sat May 29, 2010 4:05 am Post subject: |
|
|
Got all the 2x4's cut today and transported downstairs...will have to piece this together as naps line up with my motivation.
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
macgyver655
Joined: 22 Aug 2007
Posts: 6958
|
| Link Posted: Sat May 29, 2010 12:39 pm Post subject: |
|
|
| greg_mitch wrote: | Got all the 2x4's cut today and transported downstairs...will have to piece this together as naps line up with my motivation.
|
Is that your hand truck on the left for moving those boards? 
Lookin good....
_________________
macgyver566@gmail.com
|
|
| Back to top |
|
|
greg_mitch
Joined: 03 May 2006
Posts: 5198
|
| Link Posted: Sun May 30, 2010 4:30 am Post subject: |
|
|
Sometimes I feel like that is the quality of tools I am using..but I realize it is mostly user error. My daughter has been very helpful measuring boards with me before I make cuts.
Got all of the wood cut for my new sub...let's see if I can start to assemble it this next week.
Typical for me to have multiple projects in various stages of completion!
_________________
My HT Build Thread - Oak Knoll Cinema
|
|
| Back to top |
|
|
Tom.W
Joined: 09 Mar 2006
Posts: 6368
|
| Link Posted: Sun May 30, 2010 4:55 am Post subject: |
|
|
|
Nice work Greg ! What design are you using for the sub ?
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
