| View previous topic :: View next topic |
| Author |
Message |
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
 Link Posted: Wed Jan 27, 2010 5:57 pm Post subject: Parting Out Marquee 8501 (AC) - NEW PRICES! |
 |
|
As is reflected in the thread on the main forum, the HVPS on my Marquee seems to have given up the ghost and since I still have an XG kicking around I've decided to switch to that for now... As such, everything on the marquee must go! If it's not listed here, shoot me a PM - I just listed the stuff I could easily get to for model #s.
Prices do not include shipping - which will be actual cost.
Tubes:
All 3 are in good condition and will come with the assemblies (minus VNB's)
Red - a solid 8
Blue - between a 7-8
Green - a 6 or 7 - would be a solid 7 if it wasn't for there being 2 wear patterns. Very usable though...
Pictures of the tubes will follow in 5 minutes.
Price: $50/Tube
All Boards (including burnt out HVPS) for $200 USD
More Parts:
Wired Remote - $15
2x Wireless remotes - $20each
IR Sensor - $10
Lens Foam - $5
All prices are negotiable, a portion of the sales will go to Curt. I'll be accepting PayPal only.
_________________
Thanks,
Ben
Last edited by Ben851 on Fri Mar 19, 2010 11:15 am; edited 2 times in total
|
|
| Back to top |
|
 |
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
|
| Back to top |
|
|
Nashou66
Joined: 12 Jan 2007
Posts: 12836
Location: West Seneca NY
TV/Projector: Marquee 8000, 8500 And a 9500LC RetroIV , 2 Longbow 8500 Ultras(2004!!)Hd145's , Ampro 3600, a G90!!
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Wed Jan 27, 2010 7:23 pm Post subject: |
|
|
Yeah me too - it threw a great picture but at the price for a new HVPS I can't justify it when the XG is just sitting there... Unfortunately no CMM. It would be above the CLM right?
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
Nashou66
Joined: 12 Jan 2007
Posts: 12836
Location: West Seneca NY
TV/Projector: Marquee 8000, 8500 And a 9500LC RetroIV , 2 Longbow 8500 Ultras(2004!!)Hd145's , Ampro 3600, a G90!!
|
|
| Back to top |
|
|
Sparky015
Joined: 12 May 2009
Posts: 1160
Location: Cleveland / Akron, OH
|
| Link Posted: Sun Jan 31, 2010 4:52 pm Post subject: |
|
|
Ben, I am interested in your LVPS. Let me know if it's still up for grabs.
_________________
~Paul
|
|
| Back to top |
|
|
JJSuperfly
Joined: 30 Mar 2006
Posts: 92
Location: Okotoks
|
| Link Posted: Mon Feb 01, 2010 9:34 pm Post subject: |
|
|
Hi Ben,
I'm looking for case parts, specifically the lens top cover. Do you have one and if so then how much?
/Jody
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Tue Feb 02, 2010 12:50 pm Post subject: |
|
|
Hey guys,
Sorry for not getting back to you sooner - I had a moment of inspiration and started to troubleshoot the projector a little more.. I'm putting the sale on hold for a little while longer... If I go at it again, I'll shoot you guys PMs and give you first dibs on the parts you requested.
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
mp20748
Joined: 12 Sep 2006
Posts: 3146
Location: Camp Springs
TV/Projector: 9500LC Ultra / Super 02 and 03 VIM
|
| Link Posted: Tue Feb 02, 2010 1:00 pm Post subject: |
|
|
|
I'll swap you a HVPS for the Moome 1.3 card, if you'll need a HVPS.
|
|
| Back to top |
|
|
Sparky015
Joined: 12 May 2009
Posts: 1160
Location: Cleveland / Akron, OH
|
| Link Posted: Tue Feb 02, 2010 2:25 pm Post subject: |
|
|
Sounds good Ben. Good luck with the troubleshooting and thanks for the update.
_________________
~Paul
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Tue Feb 02, 2010 11:07 pm Post subject: |
|
|
Alright guys that was a quick turn around. The HVPS is almost certainly the issue - I was able to get ahold of some spare parts today to do some swapping. The HVPS is now making some weird sounds so I'm assuming it's done...
Nashou, MP, thanks for the offers but I have some NECs that are working that I think I'm going to concentrate on.
I've PM'ed the interested parties but as of right now nothing is sold - every thing can now be considered back up for sale though.
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
cmjohnson
Joined: 03 Apr 2006
Posts: 1677
|
| Link Posted: Sat Feb 06, 2010 4:18 am Post subject: |
|
|
Please give me a price for the entire chassis minus the tubes...whatever's left. I need a Marquee test bed unit to properly pursue the Advanced Frankenyoke design to completion.
I do not need the shields or skins. Just the lower deck (complete, as much as possible) and the complete rear heat sink assembly and boards.
If the rear heat sink assembly is removed from the lower deck, both sections will easily ship via UPS. They're not very heavy.
I would want the neck boards. HVPS and LVPS, dead or alive. (I've had some success in fixing both.) Focus and
deflection boards, if available. All heat sink boards. I don't need the focus yokes but would take the deflection and
convergence yokes. CPC magnets, too.
CJ
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Tue Feb 09, 2010 12:17 pm Post subject: |
|
|
| cmjohnson wrote: | Please give me a price for the entire chassis minus the tubes...whatever's left. I need a Marquee test bed unit to properly pursue the Advanced Frankenyoke design to completion.
I do not need the shields or skins. Just the lower deck (complete, as much as possible) and the complete rear heat sink assembly and boards.
If the rear heat sink assembly is removed from the lower deck, both sections will easily ship via UPS. They're not very heavy.
I would want the neck boards. HVPS and LVPS, dead or alive. (I've had some success in fixing both.) Focus and
deflection boards, if available. All heat sink boards. I don't need the focus yokes but would take the deflection and
convergence yokes. CPC magnets, too.
CJ |
Sorry for getting back to you late CJ - all boards have been tentatively sold. When I get confirmation, I will update the list as to what is available.
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Tue Feb 09, 2010 4:06 pm Post subject: |
|
|
Prices updated on Tubes - someone make me an offer on these! Also added a few new items...
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
jkruger
Joined: 24 Oct 2007
Posts: 2434
Location: Carlsbad, CA
|
| Link Posted: Tue Feb 09, 2010 4:37 pm Post subject: |
|
|
|
What's the difference between an 8500 and an 8501?
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Tue Feb 09, 2010 4:41 pm Post subject: |
|
|
| jkruger wrote: | | What's the difference between an 8500 and an 8501? |
8501 means it came with ACON. They are identical otherwise. ACON is also for sale - board, sensor, and front faceplate... not sure of price on that so make me an offer..
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Tue Feb 16, 2010 12:20 pm Post subject: |
|
|
Okay the buyer for all the boards has fallen through. The person closest to $400US + Shipping (which is what the original buyer agreed to) can have every board in the projector except for the moome cards and the ACON. I'll also throw in the IR sensor and 2 remotes. Keep in mind that although the HVPS is included, it is likely faulty.
 
 
 
 
 
They are all packed and ready to go....
 
Also, I haven't received any offer on the tubes or moome cards... if my prices are off feel free to make me ANY offer!
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Fri Mar 19, 2010 11:11 am Post subject: |
|
|
Okay guys last kick at the can here - I'll sell off all the boards in the above post for $200USD + paypal fees and shipping. I'll also sell each tube including housings and electronics for $50/tube + paypal fees and shipping (Note: cost for shipping the tubes will also include cost of packaging).
Moome cards have been sold..
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
Ben851
Joined: 13 Sep 2008
Posts: 218
Location: Ottawa, Ontario
|
| Link Posted: Wed Mar 24, 2010 1:59 pm Post subject: |
|
|
Boards and magnetics have been sold! I now have two BARE tubes left (No magnetics on them). Green and Red - I'll sell them for $25 each plus shipping but be warned, shipping will probably be close to $50-60 as I'll need to factor in packing materials as well.
Thanks
Ben
_________________
Thanks,
Ben
|
|
| Back to top |
|
|
draganm
Joined: 08 Mar 2006
Posts: 5080
Location: Colorado
|
| Link Posted: Wed Mar 24, 2010 2:18 pm Post subject: |
|
|
| Ben851 wrote: | Boards and magnetics have been sold! I now have two BARE tubes left (No magnetics on them). Green and Red - I'll sell them for $25 each plus shipping but be warned, shipping will probably be close to $50-60 as I'll need to factor in packing materials as well.
Thanks
Ben |
F&%K, how do I always miss these threads? I really needed that newer style motherboard too. If you don't actually get paid for this stuff let me know, or let the buyer know in case he doesn't actually need the Mobo
_________________
MARQUEE HD MODS: Bring your Marquee CRT projector (or clone) back up to spec and offer even greater performance!
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
