| View previous topic :: View next topic |
| Author |
Message |
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
 Link Posted: Thu Apr 30, 2009 12:12 am Post subject: |
 |
|
Craig,
Thank you for the point of refernce. It does help.
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
 |
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Thu Apr 30, 2009 12:27 am Post subject: |
|
|
| AnalogRocks wrote: | | Nashou66 wrote: |
Craig If I cant get this Blend calibrated correctly you may get a call  Just got a loaned Chroma 5 from Spectracal to test against my Display 2, i think it is off.
Sorry i hi jacked your thread a bit .
Athanasios |
I'm telling you one of these days I'm coming down there to see a fellow mad scientist at work!
dturco: Just keep at it, read read ask and read some more. You'll get it eventually. |
I will read anything that will help. But how can you set up the raster with a big black square covering it?
Athanasios no problem. It fits. I still feel there is a problem and now I'm pissing people off . Just f*cking great.
ARRRRGHHH!
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
jkruger
Joined: 24 Oct 2007
Posts: 2434
Location: Carlsbad, CA
|
| Link Posted: Thu Apr 30, 2009 12:39 am Post subject: |
|
|
| dturco wrote: | | 9500 L/C Probably both set up and repair. blue is intermittent and will not converge on the left side of screen at all. Also on screen menu will not drop out to allow raster to be seen on any tube. |
Why not just be patient, take your time, do the repair and learn to do the setup yourself. There are plenty of guys to help you here. I'm still a noob, and am still trying to get the best setup that I can. It's a hobby to me.
|
|
| Back to top |
|
|
secstate
Joined: 20 Mar 2006
Posts: 718
|
| Link Posted: Thu Apr 30, 2009 12:45 am Post subject: |
|
|
|
I say try to learn it yourself even if iit is frustrating. I just walk a way for a few days when something is bothering me. Greg Eisemann is in Silver Spring, MD and does repair work but I doubt he will any cheaper than what you are being quoted here.
|
|
| Back to top |
|
|
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Thu Apr 30, 2009 12:47 am Post subject: |
|
|
| jkruger wrote: | | dturco wrote: | | 9500 L/C Probably both set up and repair. blue is intermittent and will not converge on the left side of screen at all. Also on screen menu will not drop out to allow raster to be seen on any tube. |
Why not just be patient, take your time, do the repair and learn to do the setup yourself. There are plenty of guys to help you here. I'm still a noob, and am still trying to get the best setup that I can. It's a hobby to me. |
I will try to be more patient. If I could only get past the raster thing would feel a lot better. I think the blue neck board is screwy because if the blue drops out and I tap on the side of the lens it comes back on. The convergence still won't line up
on the outside edges.
So here I go again.
Well at least I'm getting better at typing. 
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
jkruger
Joined: 24 Oct 2007
Posts: 2434
Location: Carlsbad, CA
|
| Link Posted: Thu Apr 30, 2009 1:03 am Post subject: |
|
|
My 9" has been hanging for almost a year and it still isn't quite ready for visitors. 
|
|
| Back to top |
|
|
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Thu Apr 30, 2009 1:09 am Post subject: |
|
|
| jkruger wrote: | | My 9" has been hanging for almost a year and it still isn't quite ready for visitors. |
f*ck the visitors. I want to see it my own damn self. 
I'll get back in line soon.
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008
Posts: 2460
Location: Chicago USA & Berlin Germany
|
| Link Posted: Thu Apr 30, 2009 1:21 am Post subject: |
|
|
| Mark_A_W wrote: | The price for setting up projectors is a few beers and good company.
Refer to my post in the Eisemann thread about the uneasy alliance between hobbiests and professionals.... |
Hope on a flight and get right out there
craigr
_________________
*NEW JETI Specbos 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
*NEW Klein K10-A Laboratory Grade Colorimeter
Quantum Data QD780 Multimedia Generator
ChromaPure Pro Color Calibration Software
ISFcc ControlCAL Professional Software
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008
Posts: 2460
Location: Chicago USA & Berlin Germany
|
| Link Posted: Thu Apr 30, 2009 1:26 am Post subject: |
|
|
| Nashou66 wrote: | | CIR Engineering wrote: | | Nashou66 wrote: | When i first got into CRT PJ's I had mine professionally calibrated and it cost double what i paid for the PJ, 850 bucks, that included cpc mags and a complete set up from scratch with two resolutions set up in my lumagen. After watching i do it myself now but it was worth it. It blew my set up away.
Athanasios |
I seem to remember that day well Tom
craigr |
Ahh yes the damn Smoking Marquee thread on AVS !!! Thank god I had the old HDM from the other 8000.
I agree with Mike you should try to learn more about set up on your own, When Craig came to my
home he was doing my RPTV and the theater Pj two differnt charges. I did the marquee set up on my own and Craig was suprised how well i had the ratser maxed out and the PJ mopunted just right. It actually gave him little room to work with on the tube face but he managed, he spent close to 12 hours on the Marquee. He is the MAN!!!
Craig If I cant get this Blend calibrated correctly you may get a call Just got a loaned Chroma 5 from Spectracal to test against my Display 2, i think it is off.
Sorry i hi jacked your thread a bit .
Athanasios |
You know, I forgot it was that day 
You came home after I was at it all day and asked, "what's that smell." I said, "I don't smell anything," probably because I was immersed all day. And then (was it the LVPS) started billowing smoke! Funny how it picked that time to give up the ghost.
I wanted to come by when I was just in Buffalo. Trouble was that I had a day job and nothing after that. I drove home after and I knew I didn't have time because it was a 9 hour + car ride  after putting in 10 hours calibrating.
I'll come in to see the LongBows some time though!
craigr
_________________
*NEW JETI Specbos 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
*NEW Klein K10-A Laboratory Grade Colorimeter
Quantum Data QD780 Multimedia Generator
ChromaPure Pro Color Calibration Software
ISFcc ControlCAL Professional Software
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008
Posts: 2460
Location: Chicago USA & Berlin Germany
|
| Link Posted: Thu Apr 30, 2009 1:27 am Post subject: |
|
|
| dturco wrote: | | jkruger wrote: | | dturco wrote: | | 9500 L/C Probably both set up and repair. blue is intermittent and will not converge on the left side of screen at all. Also on screen menu will not drop out to allow raster to be seen on any tube. |
Why not just be patient, take your time, do the repair and learn to do the setup yourself. There are plenty of guys to help you here. I'm still a noob, and am still trying to get the best setup that I can. It's a hobby to me. |
I will try to be more patient. If I could only get past the raster thing would feel a lot better. I think the blue neck board is screwy because if the blue drops out and I tap on the side of the lens it comes back on. The convergence still won't line up
on the outside edges.
So here I go again.
Well at least I'm getting better at typing. |
Well, start by swapping neck boards between tubes.
craigr
_________________
*NEW JETI Specbos 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
*NEW Klein K10-A Laboratory Grade Colorimeter
Quantum Data QD780 Multimedia Generator
ChromaPure Pro Color Calibration Software
ISFcc ControlCAL Professional Software
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Thu Apr 30, 2009 1:40 am Post subject: |
|
|
Thank you Craig.
I will start there. But how about the on screen menu projecting a black square on the blue and red.And never dropping off on the green, during the mechanical set up guide, to allow raster cross- hatch to be seen?
Thank you again
I am regaining my composure 
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
PiDD
Joined: 03 Dec 2006
Posts: 87
Location: Winnipeg, Manitoba
|
| Link Posted: Thu Apr 30, 2009 2:20 am Post subject: |
|
|
| Quote: | | But how about the on screen menu projecting a black square on the blue and red.And never dropping off on the green, during the mechanical set up guide, to allow raster cross- hatch to be seen? |
You know I had this happen .. it might not be the same for you but worth a check. (and this is a little embarrassing .. but if it helps)
I was all caught up in the projector .. things were going wrong all over. (spot burns, pj turning off, not turning on) I couldnt get the menu to show up. All I would get is a black square where the menu was supposted to be .. no text??? I was always looking in the tube face and seeing text but then I realized the green wasnt bright enough to hit the screen.
Put some white screen up and hit color 2 ... is it green?
|
|
| Back to top |
|
|
Tom.W
Joined: 09 Mar 2006
Posts: 6368
|
| Link Posted: Thu Apr 30, 2009 2:23 am Post subject: |
|
|
|
Also can you post a screen shot ?
|
|
| Back to top |
|
|
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Thu Apr 30, 2009 2:29 am Post subject: |
|
|
Thank you. But no thats not it. The green does project an image and text. The blue and red just display a black square on the tube face. On the screen I can see a grid pattern sticking out from behind the square wich will move with the remote commands but can not be seen in the black square on the tube or screen.
Thank you again
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Thu Apr 30, 2009 2:32 am Post subject: |
|
|
| Tom.W wrote: | | Also can you post a screen shot ? |
My wife has the camera. Ahh sh*t I guess I'll have to buy another one. And read the manual. More to learn.
So no I can't.
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
stefuel
Joined: 07 Mar 2006
Posts: 3205
Location: Green Harbor MA USA
|
| Link Posted: Thu Apr 30, 2009 2:36 am Post subject: |
|
|
| AnalogRocks wrote: | | Nashou66 wrote: |
Craig If I cant get this Blend calibrated correctly you may get a call Just got a loaned Chroma 5 from Spectracal to test against my Display 2, i think it is off.
Sorry i hi jacked your thread a bit .
Athanasios |
I'm telling you one of these days I'm coming down there to see a fellow mad scientist at work!
dturco: Just keep at it, read read ask and read some more. You'll get it eventually. |
I'm gonna look on the map to see where west Seneca is and perhaps make a surprise visit
_________________
Chip
A Barco is only a AmPro with training wheels
Card carrying member of the AVS chain gang.
|
|
| Back to top |
|
|
Curt Palme
CRT Tech
Joined: 08 Mar 2006
Posts: 18065
Location: Langley, BC
|
| Link Posted: Thu Apr 30, 2009 3:01 am Post subject: |
|
|
Hey dturco, if the projector came from Gary M's place, it's doomed. All others are repairable. 
Why not start a new thread on the dropping out blue problem. I'm sure others will chime in that might be turned off by page 1 of this theead.
Marquees are easy to learn and easy to repair (relatively speaking). I was staying out of this thread as well as I didn't want to step in if Mike was taking care of you, but if you want assistance, and I'm not stepping on toes, then I'll dive in with assistance as well on Friday\ as I'm off the computer for most of tomorrow.
|
|
| Back to top |
|
|
dturco
Joined: 06 Feb 2009
Posts: 3750
Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Link Posted: Thu Apr 30, 2009 3:14 am Post subject: |
|
|
HeHe Gary I think I'll do ten mods at once then WTF. 
Curt you are very Gracious.I will start a new thread because this one has gotten to volatile.
And no your not stepping on toes. I will not be using Mike for the set-up or repairs.
Thank you
Dave
_________________
Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
|
Nashou66
Joined: 12 Jan 2007
Posts: 12849
Location: West Seneca NY
TV/Projector: Marquee 8000, 8500 And a 9500LC RetroIV , 2 Longbow 8500 Ultras(2004!!)Hd145's , Ampro 3600, a G90!!
|
| Link Posted: Thu Apr 30, 2009 3:44 am Post subject: |
|
|
| stefuel wrote: | | AnalogRocks wrote: | | Nashou66 wrote: |
Craig If I cant get this Blend calibrated correctly you may get a call Just got a loaned Chroma 5 from Spectracal to test against my Display 2, i think it is off.
Sorry i hi jacked your thread a bit .
Athanasios |
I'm telling you one of these days I'm coming down there to see a fellow mad scientist at work!
dturco: Just keep at it, read read ask and read some more. You'll get it eventually. |
I'm gonna look on the map to see where west Seneca is and perhaps make a surprise visit |
Your more than welcome as long As I am in the country, leaving for greece in two weeks.
Athanasios
_________________
Don't blame your underwear for your crooked ass~ unknown Greek philosopher
"The government can't control the economy without controlling the people" RR
One Smart Dog!!!
Tom Bauerle to Andre Cuomo" Elliot Spitzer Screwed some Prostitutes, you screwed the Constitution" On his call to Cuomo to Resign!!!
Marquee High Performance Bellows now shipping!!
Marquee Modifications and Performance Enhancement
Marquee C-element and Bellow removal
|
|
| Back to top |
|
|
Tom.W
Joined: 09 Mar 2006
Posts: 6368
|
| Link Posted: Thu Apr 30, 2009 4:02 am Post subject: |
|
|
Quote:
leaving for greece in two weeks.
Would that be a quarter pounder with cheese ?
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
