View previous topic :: View next topic |
Author |
Message |
brenwaterys
Joined: 26 Nov 2006 Posts: 70 Location: Spokane, WA
|
Link Posted: Fri Feb 13, 2009 3:38 am Post subject: BUF2000 Quit working |
|
|
I received my BUF2000 10 days ago and earlier this week got the last adapter I needed to hook everything up. I tested the setup Tuesday night for 10 minutes just to make sure everything worked and it looked great. I didn't have a chance to go into any gamma tweaking but it looked great. Tonight I went to spend some time to work on the gamma and when I went to turn everything on I was getting no signal to the projector. Just for testing I pulled the BUF2000 out of the chain and hooked up the 25' of cable directly to the HDFury (obviously not expecting much) but I did get a recognizable signal to the projector.
In short I get a good signal without the BUF2000 and no signal with. Any suggestions? Hopefully I am missing something simple. None of the DIP switches in the BUF2000 have been changed and I tested the power supply as good.
Setup
PS3 -> Monoprice 4x1 HDMI switcher -> HDFury1 -> BUF2000 -> 25' Monoprice cable -> Sony 1271
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
brenwaterys
Joined: 26 Nov 2006 Posts: 70 Location: Spokane, WA
|
Link Posted: Sat Feb 14, 2009 8:42 pm Post subject: |
|
|
Ok, things appear to be working again. I changed the DIP switches to match what was posted in the other thread for pass-through sync. Any idea on what might cause this?
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
|
|