CurtPalme.com Home Theater Forum

gcom007 · Last edited by gcom007 on Wed Dec 10, 2008 4:42 am; edited 1 time in total

Pics coming soon...

All parts come from Barco 1208s/E's, the last of the series with unique parts to them. Check http://curtpalme.com/Barco1208.shtm for more info on this. PM any offers...

1 quad - R762833
2 EHT Boards - R762716
2 H shift boards
2 H Output boards
2 Vertical boards - R7621127(S)
2 RGB Switcher boards
2 Port 3 Boards
2 Quad Decoder boards
2 SMPS Boards
2 Focus Blocks
2 G2/Diagnostic Boards
2 AC Input boards
1 Yoke board (Working)
1 Yoke board (might not be working, not tested so I can't say for sure, possibly fine though)
2 Controller Boards
2 Convergence Trays (hosting 3 convergence boards and the Iris2 system)
2 Iris2 Auto-convergence setups (installed on convergence trays and controller board but will sell separately.
2 sets of Deflection Yokes
1 set of Focus Coils
2 sets of 120mhz RGB neck boards
2 sets of Astig magnets
2 HV Splitters - R762718
2 sets of HD-8rev.B lenses (not in great shape, but eh, who knows...)

and then 2 of just about every other little part or fan or whatever from the projector. Let me know if there's something random you need. 1 Motherboard, 2 cases (one stock, one painted black). And that's that...

Good Tubes:
1 P16-LNJ Red, 8
2 PT18-205 Reds, 8 and 9
1 PT18-205 Green, 7-8? slight wear visible on face, great picture when last used, super sharp, even 1080P looked pretty solid

Worn Tubes:
1 PT-18-205 Green, 1, throws a surprisingly great image but serious computer burn in, but this is likely only useful to those wishing to experiment
1 P16-LNJ Green, 1, toasted out plus burn in, but still fires up
1 P16-LNJ Blue, 1-2 it's got wear and a bit of computer burn
1 PT18-205 Blue, 1-2, similar to above but not as bad, the computer burn is light and not very noticeable on screen though so it'd probably be fine for non-critical viewing

The PT18-205 set I pulled out of a 1208s/E are in better shape than the P16-LNJ's from another 1208s/E. When you look at them, you'd think the picture ought to be a lot worse. None of these worn tubes would be good for critical apps obviously, but someone may want them for something.

SisterOfMercy · Posted: Sat Dec 06, 2008 12:46 pm Post subject:

I've sent you a PM a few days ago, did you get that?

Gary M. · Guest

quad and EHT part #'s ?

thanks

-Gary