View previous topic :: View next topic |
Author |
Message |
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Thu Sep 04, 2008 3:07 pm Post subject: Barco 801g , rct2200 no signal ? |
|
|
Hello everybody,
I have a little problem with an rct2200
I have a barco 801g :
All in 720p (480p for pc screen)
Hdmi source => hdfury => barco 801g OK no problem
Hdmi source => hdfury => rct 2200 => barco : NO SIGNAL
RGB source or composent source => rct 2200 => barco : NO SIGNAL
RGB source or composent source =>rct 2200 => pc screen : black screen
I have change the jumper 5/6 8/9 for manual settings but no change : no signal
An idea ?
Cordially Gwen
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Thu Sep 04, 2008 4:13 pm Post subject: |
|
|
Hello, I use the rct2200 for the first time, i use the power supply send with the rct.
The power suplly have maybe a problem but i have not another power with same specification for test.
Gwen
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Thu Sep 04, 2008 4:42 pm Post subject: |
|
|
On the power suply:
class 2 transformer
input 120vac 60hz 9w
output 9vac 500ma
Gwen
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Thu Sep 04, 2008 5:01 pm Post subject: |
|
|
Yes i have an adaptator for that
Gwen
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Thu Sep 04, 2008 5:52 pm Post subject: |
|
|
I think that just convert the pins
I use this adaptator with others 110v products and they work good.
I must buy an transformer for rct 2200 ?
Gwen
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
Link Posted: Thu Sep 04, 2008 6:05 pm Post subject: |
|
|
Some 110V products can work on 220V as well. When it does it will say so on the back of the unit. The RTC2200 110V power supply only works at 110V and will probably be destroyed when run at 220V. The problem is that I am out of 220V supplies, I ordered them about a month ago but the shipment seems to be lost, when I remember right I promised I would ship you a 220V supply when I had one and I still will. So for the time being do you want me to ship you a new 110V supply?
_________________ ESL-0.5 Full Range Electrostatic Loudspeakers | RTC2200 Component to VGA Converter with Gamma Boost
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Thu Sep 04, 2008 6:27 pm Post subject: |
|
|
I'm looking for a transformer, is not expensive and is useful.
After i will test the transformer with the 110v , if it's good , i can wait for the 220v power supply , if it's is bad i accept your offer for the new 110v. I will send you a message in this topic after test .
Thanks a lot for your time and your help
Gwen
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Fri Sep 05, 2008 4:29 pm Post subject: |
|
|
Hello,
With a transformer it's the same problem : no signal, so i think the power supply is done , if you can ship me a new power supply 110v
Your new product : Crescendo BUF2000 RGB buffer + Gamma it's like a rct2200 with another form or it's totally different ?
Thanks a lot
Gwen
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Fri Sep 05, 2008 4:54 pm Post subject: |
|
|
Thank you
Ok, I use only rgb source on my barco so for me BUF2000 et RCT2200 have the same function (gamma)
It's possible to buy an buf2000 now ?
Cordially Gwen
|
|
Back to top |
|
|
beun
Joined: 28 Jun 2006 Posts: 676
|
|
Back to top |
|
|
Gwen
Joined: 04 Sep 2008 Posts: 16 Location: France
|
Link Posted: Fri Sep 05, 2008 5:18 pm Post subject: |
|
|
Thank a lot (bis)
Gwen
|
|
Back to top |
|
|
|
|