CurtPalme.com Home Theater Forum

Bruce 09 · Posted: Thu Mar 13, 2008 6:58 pm Post subject:

[quote="kal"]

**kal** · Posted: Thu Mar 13, 2008 8:52 pm Post subject:

**kal** · Posted: Thu Mar 20, 2008 6:32 pm Post subject:

Update: Only 5 VIM-HD cards are now left in the current batch. Moome tells me they're all on hand now so they will ship immediately and you should have it within a week or two.

Next batch likely ship in 2-3 months.

Kal

Thor · Joined: 09 May 2007 Posts: 72 Location: Denmark

No chance that the next batch will be a new design? I can wait if I knew it would be 1.3.

**kal** · Posted: Fri Mar 21, 2008 7:34 pm Post subject:

CRTuser · Joined: 16 Apr 2006 Posts: 16

Hello everyone,

I just received my VIM card.

I took the existing slot 2 card out of my 9500LC, and put the new card in its place. I still want to keep the slot 1 RGB input available. Is it correct?

I hooked a regular DVD player to it through component for testing, and pictures showed, but definitly needed convergence adjustment.

How did all you expeienced guys approach the entire installation process, from installing the card to getting perfect pictures?

Thanks.

**kal** · Posted: Tue Mar 25, 2008 12:49 am Post subject: Re: VIM-HD installation

**kal** · Posted: Mon May 26, 2008 12:34 am Post subject:

UPDATE:

A small batch of 9 overstock VIM-HD cards are available from the last batch. Orders will be shipped immediately. Once sold out it'll be a few months before the next batch is made.

To order yours see: http://www.curtpalme.com/MARQUEE_VIM-HD.shtm

Kal

**kal** · Posted: Tue Jun 03, 2008 5:08 pm Post subject:

**kal** · Posted: Wed Jun 04, 2008 1:26 pm Post subject:

**kal** · Posted: Mon Jul 07, 2008 6:10 pm Post subject:

Update from Moome:

There are only 2 VIM-HD cards left for immediate shipment. Once sold out I'm told that Moome moves on to other things he's been working on so it'll be a while before another batch of these cards gets made.

Kal

**kal** · Posted: Sat Jul 12, 2008 1:33 pm Post subject:

Update:

The Marquee VIM-HD HDMI input cards are SOLD OUT. Moome's not sure when he'll make a new batch. Probably not until Fall 2008.

To be notified when a new batch is made available, sign up for our newsletter. You may want to consider adding the new EXT-FULLHD instead.

Kal

Ohmess · Joined: 11 Sep 2008 Posts: 242 Location: Vienna, VA

Any update on Marquee Moome cards?

Are these a complete replacement for the Marquee VIM or do they piggyback on the VIM?

Nashou66 · Posted: Mon Sep 22, 2008 7:10 pm Post subject:

Ohmess · Joined: 11 Sep 2008 Posts: 242 Location: Vienna, VA

I hope these aren't stupid questions, but here goes:

I presume I should continue to think about upgrading the opamps on my VIM (per the Mike Parker thread)?

In thinking about switching, will the Marquee recognize the card as "input 2"?

Nashou66 · Posted: Mon Sep 22, 2008 8:45 pm Post subject:

If you have the CLC449 chips your fine, And yes, you will set up the PJ for input 2.

Athanasios

Ohmess · Joined: 11 Sep 2008 Posts: 242 Location: Vienna, VA

Are there HDCP concerns with these boards?

**moome** · Joined: 01 Jun 2007 Posts: 469

do you mean VIM-HD? No issue,thanks

Ohmess · Joined: 11 Sep 2008 Posts: 242 Location: Vienna, VA

Thanks Moome. Any update on timing on the Marquee cards?

p.s. two HDMI inputs, like the Sony cards, would be cool. Smile

**moome** · Joined: 01 Jun 2007 Posts: 469