NOW SHIPPING! *Exclusively* through
CurtPalme.com!
Buying more than
one? See our
volume pricing
for installers and group buys.
Upgrade any TV/projector by adding an HDMI digital video input! Works
with any TV that accepts either Component (YPbPr/YCbCr) or RGB/VGA! Don't be stuck watching Blu-ray, DVD, Satellite/Cable at only 480p! Add an
HDfury2, allowing you to watch hi-def content at up to FULL HD 1080p resolution!
HDfury2 is the world smallest and most powerful HDCP deciphering
converter ever built! The result is a crystal clear image that is perfectly centered
with amazing color depth. It features VGA and Component video output, Analog & Optical sound output, and
add-on
accessories too ...
 CURTPALME.COM
EXCLUSIVE! Our Special Edition HDfury2 is unique in that it is housed in an
advanced 100% aluminum case (no plastic at all) with custom laser engraving.
The thick aluminum case shields the unit from external noise and
interference for the best image quality possible. Only available at CurtPalme.com!
Why do I need HDfury2?
How old is your HDTV or projector? If it was bought prior to
2005 it does not have an HDMI
input. This means that you'll never be able to use the full potential of your expensive
CRT projector, digital projector, plasma display, or PC screen with new sources
like the PS3, Xbox360, Blu-ray players, Cable TV / Satellite boxes, or PC
graphics cards at up to 1080p FULLHD resolution.
Without an HDMI input your
display will be limited to 480p in most cases - that's only 1/6th the
resolution of 1080p FULLHD! You need HDfury2 to unlock the full potential of your
display! Why buy an expensive new HDTV when your existing one
works perfectly well? Enhance your display's compatibly and value with HDfury2!
Designed by a group of home theater videophiles, the HDfury2 delivers a razor sharp picture
with unprecedented colour from any HDMI source, supporting all resolutions up to
1080p FULL HD. The picture quality improvement when using
HDfury2 is
immediately obvious, providing an amazingly clear and detailed picture!
Can't I use the component output on my Blu-ray player and other devices?
No. Not without severe limitations:
-
Blu-ray, HD DVD, and DVD players (as well as the Xbox360 and
PS3) will not upscale standard DVDs to 1080p over analog outputs. They
are limited to 480p output only. To avoid
this limitation digital HDMI must be used.
-
Image Constraint Token (copy protection) on Blu-ray or HD DVD discs
reduces resolution from 1080p to 540p (1/5th the resolution)
over analog outputs. To avoid this limitation digital HDMI must be used.
-
And most importantly: The image quality is
significantly worse over analog outputs. To avoid this limitation
digital HDMI must be used.
HDfury2 is what you need to to add digital HDMI
to your TV to bring it into the
next generation and provide the best image quality possible!
Will HDfury2 work for me?
1. Does your display support at least one of the following
resolutions: 720p or
1080i or 1080p?
2.
Does it have a Component or RGB (PC/VGA) input
connector? (some examples shown below)
 |
|
 |
|
 |
|
Component Input |
|
RGB input
(D-Sub VGA style) |
|
RGB input
(5-BNC style) |
If you answer YES to both questions then HDfury2 will work for you!
What's Included? / Which cables should I order?
-
Component Cable:
For displays with a component (YPbPr) input. Included with every order.
-
RGB Cable:
For displays with an RGB (VGA) input. The Basic Kit gives you a choice of
one of three RGB cables, the Advanced Kit includes all three (useful if you
may need more than one or don't know which to order):
1. BLUE (VGA
to VGA male cable): For displays with a standard female
D-sub VGA
style RGB connector. This is the most popular RGB
input connector.
2.
GREEN (VGA
to 5-BNC male cable): For displays with 5-BNC input
RGB connectors.
Used mostly by professional displays.
3. RED (VGA to Barco Port 3 cable):
For Barco CRT projectors only.
More info on Barco port 3.
If your display only has component inputs you will not
use the RGB Cable so it doesn't matter which you order. If your display has both RGB and component
input, use RGB if possible. If your display has 5 RCA style connectors order the GREEN
cable and use five BNC to RCA adapters (sold separately).
-
Power Supply (wall plug): You have a choice
of one of three power supplies.
Choose based on your region:
 |
|
 |
|
 |
|
The power supply
is required
if
the HDMI cable is longer
than 5m (16 feet) or if the source device doesn't
seem to be supplying adequate power to the HDfury2. A power
supply is included with every order. The Advanced Kit includes two power
supplies: One for the HDfury2, one for the GammaX. |
|
US (120V/60Hz) |
|
EURO (230V/50Hz) |
|
UK (240V/50Hz) |
-
6' USB 5V cable:
An extra cable that can be used to supply power to the
HDfury2 from any USB port if using the regular power supply is not
convenient.
(Useful if the HDfury2 is used with a PC or PS3).
-
(ADVANCED KIT
ONLY) GammaX converter:
On most TVs and
projectors, movies and games are too dark or missing detail in dark scenes.
Gamma-X to fixes this by adding a 'Gamma Boost' without washing out the
picture. Simply plug the Gamma-X directly into the HDfury2, HDfury, HDfury
Gamer Edition, or any device with RGB output and enjoy a more vibrant
picture with perfect shadow details! More
information
- (ADVANCED KIT ONLY) HDMI cable:
For connecting your source
device to the HDfury2.
-
(ADVANCED KIT ONLY) Optical audio cable: A Toslink (fiber
optic) cable for connecting the HDfury2 sound output to your
receiver/pre-amp.
HDfury2 Features:
Main features:
-
HDMI input
-
Component (YPbPr/YCbCr) and VGA (RGBHV) video output
-
Sound output in both Analog and digital Optical (S/PDIF) through an
innovative 3.5mm combo jack
The HDfury2 also includes many first time
world exclusive features:
-
Perfectly
centered image in all standard NTSC/PAL modes (see below)
-
Performs Colour Depth Upscaling in all modes
(see below)
-
Automatic SD/HD color-space selection
-
Accept third party accessories on its output
-
Lowest power consumption of any converter
-
Software upgradeable (EDID and Firmware)
-
Custom profiling to match any display requirements
or to limit output resolution
-
Screen position adjustment through firmware
-
Smaller and is able to handle and include more technology
innovations than the original HDfury
Colour Depth Upscaling:
A world first! HDfury2 accepts both digital RGB and component (YCbCr)
video over HDMI and automatically processes both correctly for zero loss of
dynamic range. HDfury2 takes this HDMI standard 16-235 data and cleverly scales it to
a fully maximized output
dynamic range (0-255) before sending it out to the final DAC conversion stage. The result is
an absolutely stunning and dynamic picture!
Technical details: Component (YCbCr) is
sent in a standard 16-235 code range in the HDMI
domain. Most other converters simply output
this exact same range but in analog form. These other converters basically feed code 16 to the DAC when black is requested and 235 when white is requested. However, DACs
do not automatically comply to video standards resulting in code 16 translating into 44mV and 235 into 645mV (if 700mV is the full
range) and while black or white crush does not occur, these converters limit the dynamic range
resulting in a less than optimal picture.
This is highly noticeable when you compare full range (0-255) vs. limited range
(16-235).
Perfectly centered image:
Another world first! HDfury2 is the only device that recreates the sync and timing alignment
completely and therefore perfectly centers the image according to the SMPTE
standards in all modes.
This is a major difference in the architecture. No other converter can compete
against recreating the syncs completely.
Technical details: RGB as defined by CEA861A/B/C/D
specification defines the leading edge
of HSyncs at different locations than the SMPTE/ITU standard does for component
(YPbPr). This
is why ALL but one direct RGB to component converters fail to correctly center
the picture. Others disregard
time-domain correction placing the image too far "left"
on the screen. This is
the reason why people using the original HDfury coupled with a typical stand alone converter fail even
though the original HDfury is not doing anything "incorrectly". It simply passes information
which will be interpreted incorrectly by many TVs. As well, while less important (but still missing from other
converters), HDfury2 outputs
tri-level syncs in all HD modes as required by standards. Again, no standalone
RGB-converter does this. We have never come across or heard from a customer
of a TV that requires tri level sync but still it's nice to meet the spec and
be able to claim compliance.
How does the HDfury2 compare to the original HDfury?
|
Feature/Specification |
HDfury2 |
Original
HDfury |
|
Data processor |
11 bit, 200 Mhz |
10 bit, 175 Mhz
|
|
Input |
HDMI based (DVI-D
compatible) |
DVI-D based (HDMI
compatible) |
|
Output |
Component or RGBHV
(user selectable) |
RGBHV only |
|
Sound Output? |
YES, Both Analog &
Digital Optical (S/PDIF) |
NO |
|
Automatic image centering? |
YES, in all modes |
NO |
|
Colour Depth Upscaling? |
YES, in all modes |
NO |
|
Lower power consumption |
YES |
NO |
|
Software upgradeable? |
YES, Both firmware
(specialized tool required) and EDID |
YES, EDID only |
|
Screen position adjustable via
firmware? |
YES |
NO |
|
Output resolution limit and custom
profiling? |
YES |
NO |
|
Technology |
6 layer high density
class 5 PCB |
4 layer
mid density class 5 PCB |
The HDfury2 solves all original HDfury issues, including:
A few source devices have issues handshaking with DVI-D (hdcp)
devices such as the original HDfury, requiring the use of an HDMI switch between the source and the
original HDfury.
SOLVED!
HDfury2 uses an HDMI input instead of DVI-D (hdcp) granting compatibility with all HDMI sources including
those that could not handshake properly with DVI-D (hdcp) devices.
Some sources like the Denon 4308 receiver could not
handshake with an incomplete CEA861 EDID extension block causing issues with the
original HDfury.
SOLVED!
The HDFury2 CEA861 EDID extension
block is compliant to latest Rev. D.
The picture is shifted to the left on some displays when
using the original HDfury and it could not be centered within the display's adjustment range.
Use of external device such as RTC2200 or
Box 1020 was needed.
SOLVED!
HDFury2 is the
world's first converter to perfectly center the image at all resolutions. No
other converter does this as the others simply pass the original signal through.
Some sources do not output enough current on the digital
output. Use of external power supply was needed for the original HDfury (either Wall
Plug or USB).
SOLVED!
HDFury2 consumes 160mA less current
while running at 1080p compare to the original HDfury. HDfury2 supports more sources out
of the box without requiring the use of the power supply.
Some users reported their original HDfury ran "hot" after
many hours of use.
SOLVED!
HDFury2 unit runs 1.2w cooler at
1080p than the original HDfury.
The original HDfury is unable to run long analog cables on its output.
ex: Displays with VGA cords is problematic.
SOLVED!
HDFury2 can run longer analog cables
on its output (to approximately 25-35 feet).
Hard to identify when the power supply is required
for the original HDfury (some source devices do not provide enough current).
SOLVED!
HDFury2 has a new LED system which
indicates power status: If the LED is OFF or blinking then the HDFury2 is not
receiving enough power from the source device and the external HDFury2 power
supply must be used. If the LED is ON the HDFury2 is receiving adequate power.
HDfury2
Specifications:
-
INPUT: Digital HDMI 19p
FEMALE Port (100% digital)
-
OUTPUT: Analog RGBHV or Component (YPbPr/YCbCr) via HD-15
D-Sub (VGA style) MALE connector
-
User Selectable RGBHV / Component (YPbPr/YCbCr) output with a
switch
-
A HDMI -> HDMI cable is used to connect to an HDMI source
-
RGB 4:4:4 (8 bits) digital input
-
YCbCr 4:4:4 or 4:2:2 digital input
-
Compatible with non-HDCP (DVI-D) or HDCP sources
-
Compatible with any RGB Display
-
Compatible with any YUV Display
-
Directly connects to a display's VGA (RGB) 15 pin D-Sub input
-
Directly connects to a display's Component (YPbPr/YCbCr) input
using included breakout cable
-
Takes less then 1 minute to install (Plug & Play)
-
11bit 200MHz data processing
-
Triple 11bit 200Mhz video DAC
-
RGB-H/V Male Port D-SUB 15 Output video analog signals
(0.7Vpp (RGB) / 1Vpp (YPbPr) over 75 ohms impedance)
-
Ultra short Analog links (<1 cm) on the HDfury2 for optimal
quality
-
HDMI video bandwidth: 25-165MHz
-
HDMI Data Rate - Bandwidth 1.5 Gbit/sec (Single link)
-
Supports all HD/SDTV formats from 1080p down to 480i
-
HDTV ready (480i/480p/576i/576p/720p/1080i/1080p48/50/60
compatible)
-
DVI 1.0 compliant
-
HDMI 1.1 and 1.2 ready
-
HDMI 1.3 interoperable
-
HDCP compatible with embedded keys loaded
-
HDCP ready
-
Reprogrammable Firmware (with specialized tools)
-
Screen position adjustable through Firmware and Custom
Profile
-
Accepts third party accessories on output such as the
GAMMA-X (Gamma Correction)
-
Automatic Input Format Detection: Digital YCbCr and RGBHV
-
Full dynamic range for all input modes to maximize the level
of detail
-
Automatically switches color-spaces for both HDTV (Rec.709) and SDTV
(Rec.601)
-
Precise black levels - no black crush in any standard mode
-
Stereo High-Quality Analog Audio Output
-
Stereo High-Quality Digital/Optical Audio Output (S/PDIF
format)
-
HD-DVD and Blu-Ray Disc player compatible
-
Playstation3 and Xbox360 compatible
-
Satellite and Cable set-top box compatible for HDTV
-
HDMI or DVI-D video graphics card compatible
-
HDCP compatible with embedded keys loaded
-
Energy management : DVI and VESA DPMS compatible
-
Ultra low power consumption in Standby (3,5mA)
-
Maximum power : 0.37A under 5V (at 1080p/60)
-
On-board DC/DC converter (1.8V) with extra-low EMI signature
-
Power +5V from DVI/HDMI
-
Blue LED to display active digital link and power status
-
Small size : 75x56mm cabinet
-
100% ROHS compliant (Restriction of Hazardous Substances
Directive)
-
Installation: The HDfury2 module may be DIRECTLY
screwed to the back of the display into the VGA SUB-D plug.
-
Shortest RGB and Component (YPbPr) analog video link as
possible.
-
HDCP rules compliant: No end-user access to decrypted analog
video. Once screwed, this module becomes "a part of the display itself".
-
Professional factory made (mass-production) using pick/place
and reflow/wave solder pro equipment.
-
Gold Plated connectors, tracks and material
-
Full aluminium case with thermal dissipation
-
Optional +5v input and power supply
-
EDID detective feature: EDID eprom can be reprogrammed using
a computer through the graphics card (feature reserved for
professionals)
-
Internal EDID EEPROM with complete CEA861 extension block
-
One year warranty
HDfury2
Pictures
& Screenshots:
Exclusive CurtPalme.com Special Edition HDfury2 with 100% aluminum (all
metal) casing and special engraving:
More official photos coming soon!
HDfury2 Recommended Add-ons:
|
Have more than one HDMI device? Order this
switch at the same time as your HDfury2!
One of the smallest and
smartest HDMI 1.3
switches available on
the market today!
Supports 1080p FULLHD
and the latest Dolby
TrueHD and DTS-HD Master
Audio lossless audio
formats found on
Blu-ray.
$69
USD
BUY NOW » |
|
|
On most TVs and
projectors, movies and
games are too dark or
missing detail in dark
scenes. Gamma-X to fixes
this by adding a 'Gamma
Boost' without washing
out the picture.
Simply plug the Gamma-X
directly into the
HDfury2
and enjoy a more vibrant
picture with perfect
shadow details!
Only available at
CurtPalme.com!
$99
USD
BUY NOW » |
|
Reviews/Testimonials
"I got mine today and it is FAB. Well done to everyone. Thumbs-up! The
[CurtPalme.com Special Edition] unit is ALL metal with the gold colour front
bezel. Weighs quite a bit actually. I have only had my XBOX 360 plugged into it
with HD DVD Drive add-on (yes I was one of the silly sods that bought one) and
the picture is far better than the HDFury1. Colour is spot on and not
washed out. I no longer need the audio cable from the XBOX as I have a small
3.5mm jack to jack cable from my HDFury2 to back of TV. " - Weehappypixie
"[The] Picture is stunning!" - Chorder
"I just hooked up the Special Edition HDfury2 to my Mitsubishi 55809
RPTV and it works like a champ. I am
now watching 'Luther the Geek' on a Phillips DVD player that upscales to 1080i.
HDFury2 appears to have fixed all the issues, as promised, that plagued those
trying to use HDFury1 with RPTVs (at least as far as the Pioneer's are
concerned). The picture is perfectly centered, there are no weird green lines,
and no swings in brightness that I had read about in other posts regarding
HDFury1. Awesome work. The colors look awesome, and sync locked automatically to
the input. No screwing around was needed." - Lexx21
"The new Special Edition HDFury2 works great with my Pioneer
SD-643HD5 RPTV." - Schmoe
"I want to congratulate you for a great product. I have a Mitsubishi WS55905
rear projection Television and have tried several devices to connect my PS3 to
my television to take advantage of upscaling. I just connected your HDFury2
and it works perfectly. The shifting has gone away and the colors, especially on
dark scenes look great." - James_Aguirre
"WOW! I must confess, I didn't really expect to see a difference in the
picture quality. Boy was I wrong. The picture is awesome. Everything works
exactly as it should. Dish VIP722 to Denon AVR-788 to HDFury2 to Mitsubishi
WS55511 TV (component YPbPr input) No problems whatsoever! PS3 looks great.
Overall, the best way I can describe the picture is "smooth". The HDfury2
really shows off what my old set can do. There is no "grainy reds" and the
picture seems to be brighter overall. It brought new life to my old Pink Floyd
Pulse concert. So many colors and details in that video and the HDfury2 brings
it all out. There is no grainy picture, yet the picture looks very sharp.
I'm anal rententive about having perfect registration and the TV must be working
well because edges are extremely sharp. I didn't think having the all-metal
CurtPalme.com special edition casing would make any difference. But it just adds
a touch of class. I was surprised at how heavy it was. But when you pay a
premium for something it should be built this way. It feels solid and looks
great. Finally, I want to thank the whole gang on a great job. The HDfury2 is a
great device. For me there are no flaws. The shipping from Taiwan to,
essentially, Washington DC was super fast. On Friday when I received my
shipping notice I never expected to be installing it on the following Monday.
And everyone on the forums has done a great job keeping my informed about what
to expect and when. Kudos to all!!! It was well worth the wait and the money." - Toejo
"... And just to let you guys know that are running things (Kal, HKmod,
etc....) I think what you are doing is outstanding! The way you are backing up
your product makes me trust you even more. You have a long time customer here
and I just wanted to say 'Thank you for your effort'. It is not going
unnoticed." - UGC
"My opinion is that the Fury2 has a sharper image than the Moome EXT-FULLHD.
Don't know why, but I know after an evening of watching the Fury2, never once
did I wish for a sharper picture. The increased sharpness of the Fury2 is
most evident looking at the text on my HTPC's windows desktop or watching
distance scenes with Blu-ray or HD-DVD." - Citation4444
"Okay then! This thing does everything that I've heard! It really works!!!
This is money well spent and will extend the life of the CRT based RPTV
that has served me so well for so many years. Sure I don't have the fancy 1080p
that so many other displays boast, but I also have no rainbow or screen-door
effect. The HDfury2 maximizes the the functionality of my non-HDMI television,
and gives me more time to evaluate the new technological improvements that are
coming to market (LaserVue, new LCD display tech). Well done HKMod, Kal and
everyone else working on development for this product! The HDfury2 continues
to ROCK and has unlocked the full potential of my home theater!" - SpenceJT
"I'm definitely impressed with the module, as
it has given my RPTV new life." - jdbt3027
"The HDfury2 works beautifully. It saved us quite a
hefty investment in a new large monitor." - Mats
Need more information? See the HDFury2 FAQ!
Visit the HDfury2 Discussion/Support Forum
Questions should be directed to
the HKmod company at: HKmod@curtpalme.com |
